I did tighten those bolts to 33 foot pounds. Yup, I used the gasket that came with the boot kit. Now that I think about it I do believe it was making noise before I even removed the axle. The noise is just getting a little worse now. On Oct 6, 2012 3:28 PM, "Jack Simon" <[email protected]> wrote:
> Did you put new gaskets between the flange and the inner CV when you put > them in?? Torque setting for them is, I think, 36 ft.lbs. Could be the > bolts have worked loose and letting it seep out. Got my last set of cork > gaskets from NAPA.......Jack > > > http://www.napaonline.com/Catalog/Result.aspx?Ntt%3dCV%2bjoint%2bgskets%26Ntk%3dKeyword%26Nty%3d1%26N%3d599001%2b101992%2b50074%2b2074015 > > On 6 Oct 2012, at 15:00, Chad Rebuck wrote: > > There is no sound when turning, so I don't suspect the outer cv joints are > bad. I would not think the inner cv joints Its driving me nuts. > > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > _______________________________________________ a2-16v-list mailing list [email protected] http://mail.a2-16v.com/mailman/listinfo/a2-16v-list
