-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andrew Cilia wrote:
> when you say sounds, what type of sounds? Doom sounds or just
> rubbish?
Doom sounds.
> You should be stracing the doom.x86 process.
Done as instructed. The trace is attached.
>
> Now, if you've soft rebooted and the screen came up garbled, then
> some process is not talking nicely to the card and the problem is
> persistent.
I killed X and doom via SSH, and the monitor just turned itself off. I
then tried to reboot (via SSH).. it looked like it started to reboot,
but then the screen came on again and it was garbled - and nothing
happened. After I rebooted (manually) the screen worked fine.
Keith
>
> On Wed, 2005-11-16 at 17:21 +0100, Keith Vassallo wrote:
>
>> I launched Doom III and waited for it to freeze, then I ssh'ed
>> into the system and ran top.
>>
>> The top most process was X (with some 99.9% CPU activity).
>> Sometimes doom.x86 (the Doom III process, of course) would rise
>> to the top for a few moments, but then go down again. The
>> relevant lines from top:
>>
>> When X was on top: PID USER PR NI VIRT RES SHR S %CPU
>> %MEM TIME+ COMMAND 11515 root 25 0 305m 32m 8824 R
>> 99.8 2.2 0:45.56 X 1 root 16 0 2548 536 452 S 0.0
>> 0.0 0:01.15 init 2 root 34 19 0 0 0 S 0.0 0.0
>> 0:00.00 ksoftirqd/0
>>
>> When doom.x86 was on top: PID USER PR NI VIRT RES SHR S
>> %CPU %MEM TIME+ COMMAND 13237 keithvas 23 0 802m 715m
>> 8320 R 97.3 47.7 2:04.93 doom.x86 11515 root 25 0 305m
>> 32m 8824 R 2.4 2.2 0:36.50 X 13235 keithvas 16 0 10424
>> 1276 928 R 0.2 0.1 0:00.38 top
>>
>> My load average just kept rising, and rising. At a point it was
>> 20.86, 8.14, 3.16 (whatever that means).
>>
>> Before the game freezes, the top most process is doom.x86 (with
>> around 85% CPU usage) and X comes in at third or fourth place.
>>
>> Whilst the game is frozen, I occasionally here sound from my
>> speakers. Other times I hear nothing. When I'm hearing sounds,
>> I'm able to type in commands via SSH. When I'm not hearing
>> sounds, nothing appears and the system grinds to a halt. This
>> suggests that (perhaps) the system tries to recover but then is
>> frozen again.
>>
>> When I run strace on X, I keep getting the following:
>> rt_sigreturn(0xe) = 36984 --- SIGALRM
>> (Alarm clock) @ 0 (0) --- rt_sigreturn(0xe)
>> = 36984
>>
>> Doom III spawns several processes, here's what they say: [
>> Process PID=13250 runs in 32 bit mode. ] select(19, [18], NULL,
>> NULL, NULL
>>
>> [ Process PID=13251 runs in 32 bit mode. ] getppid()
>> = 13250 poll([{fd=15, events=POLLIN}], 1, 2000) = 0
>>
>> [ Process PID=13253 runs in 32 bit mode. ]
>> gettimeofday({2811813141633945, 586448462527099936}, NULL) = 0
>> nanosleep({38654705664000000, 586448610090393576}, NULL) = 0
>> gettimeofday({2868712868371353, 586448630030824480}, NULL) = 0
>>
>> I tried to reboot the PC. I did kill -9 (the X pid) and kill -9
>> (the doom III pid), but when I looked at the machine's monitor it
>> just turned off (i.e. no output from the video card). I then
>> tried to reboot via SSH. The system looked like it tried to
>> reboot, but then a garbled screen appeared and nothing more
>> happened.
>>
>> The second time I tried this, kill -9 (the X pid) stopped sound
>> coming from my speakers, but the image just froze (i.e. frozen,
>> not turned off). I then killed doom, but the machine remained
>> frozen. After this, the machine completely froze (i.e. no
>> commands, even from SSH).
>>
>> Keith
>>
>> Andrew Cilia wrote:
>>
>>> Keith, just a point on something you wrote in an earlier email.
>>> If you can ssh in, then the system has not crashed as such. It
>>> would seem that your video subsystem is stuck. Given that you
>>> can get in via ssh, is there anything that is hogging the CPU
>>> that you can see via top. If so, get an strace on it as this
>>> will help in debugging.
>>>
>>> Another thing. Are you running in SMP mode?
>>>
>>> subsystem is On Wed, 2005-11-16 at 07:26 +0100, Keith Vassallo
>>> wrote:
>>>
>>>
>>>> When I bought the card, I was using kernel 2.6.12, I
>>>> re-compiled that, and it still didn't work. I also compiled
>>>> 2.6.13 - still didn't work.
>>>>
>>>> glxgears works. Also, some games like GTA: Vice City work
>>>> with no problems. Also, If I set the quality of graphics in
>>>> Doom III to medium, the game works.
>>>>
>>>> It seems like only very intensive use makes the box die. It
>>>> could be something to do with the bug Andrew mentioned
>>>> earlier (the bug is only a problem with very intensive use).
>>>> It can't be a hardware problem, Windows worked.
>>>>
>>>> Keith
>>>>
>>>> Jean Azzopardi wrote:
>>>>
>>>>
>>>>> I will not pretend to be an expert on this, but have you
>>>>> tried recompiling the kernel? Also. do simpler 3D apps
>>>>> work? Such as glxgears? Try running glxgears in a
>>>>> terminal...
>>>>>
>>>>> On Tuesday 15 November 2005 6:30 pm, Keith Vassallo wrote:
>>>>>
>>>>>
>>>>>
>>>>>> The messages I get from dmesg after start-up show no
>>>>>> errors - just that AGPART is being loaded, finds a
>>>>>> graphics card and everything seems normal.
>>>>>>
>>>>>> I had already checked out the thread you pointed me to.
>>>>>> The thread provides a patch to fix the problem, but I'm
>>>>>> supposed to already have that patch - Gentoo have
>>>>>> included it in their ebuild (of which I have the latest,
>>>>>> 7676).
>>>>>>
>>>>>> I tried to figure out what they're talking about when
>>>>>> they mention global_flush_tlb(), and found this
>>>>>> interesting post:
>>>>>> http://marc.theaimsgroup.com/?l=linux-kernel&m=112928307319954&w=2
>>>>>>
>>>>>>
>>>>>> It seems, as is also said in the nvidia post, that this
>>>>>> is being worked on in kernel 2.6.14. Unfortunately, the
>>>>>> thread I found mentions delays - not total freezes -
>>>>>> being caused by this "bug". The patch is against
>>>>>> 2.6.14-rc4. I don't totally understand kernel terminology
>>>>>> - but if the patch is against rc4, does that mean it will
>>>>>> be included in rc5? Whichever it's included in, the
>>>>>> latest (testing) kernel available on Portage is
>>>>>> 2.6.14-r2.
>>>>>>
>>>>>> Seems like this will be a waiting game, unless anyone
>>>>>> else has suggestions.
>>>>>>
>>>>>> Keith
>>>>>>
>>>>>> Andrew Cilia wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Do you get any messages after agpart module kicks in
>>>>>>> during startup? Did you try some other forums besides
>>>>>>> gentoo? For example, I found this:
>>>>>>>
>>>>>>> http://www.nvnews.net/vbulletin/showthread.php?t=57990
>>>>>>>
>>>>>>> Cheers
>>>>>>>
>>>>>>>
>>>>>>> On Tue, 2005-11-15 at 16:01 +0100, Keith Vassallo
>>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Hey Guys,
>>>>>>>>
>>>>>>>> I've recently upgraded to an XFX GeForce 6800 GT from
>>>>>>>> my previous card, a GeForce FX 5200. Since having
>>>>>>>> done so, I'm having problems playing
>>>>>>>>
>>>>>>>>
>>>>>
>>>>> games.
>>>>>
>>>>>
>>>>>
>>>>>>>> When starting Doom3 in "Ultra high" or "high" quality
>>>>>>>> mode, the game locks up either seconds, or minutes,
>>>>>>>> after the game begins. The whole system freezes,
>>>>>>>> neither CTRL+ALT+BACKSPACE nor anything else works.
>>>>>>>> Starting doom in "medium" quality mode seems to stop
>>>>>>>> the problem from happening, although I haven't played
>>>>>>>> the game for longer then 30mins. When starting Half
>>>>>>>> Life 2, the game freezes a few seconds after the menu
>>>>>>>> is displayed. With Counterstrike: Source, the game
>>>>>>>> loads a map, then sends me back to the desktop.
>>>>>>>>
>>>>>>>> Here's some information you may need:
>>>>>>>>
>>>>>>>> Gentoo running amd64 on AMD Athlon 64 3000+ (Socket
>>>>>>>> 939) XFX GeForce 6800 GT (AGP) 1.5GB DDR RAM
>>>>>>>>
>>>>>>>> cat /proc/driver/nvidia/agp/status:
>>>>>>>>
>>>>>>>> Status: Enabled Driver: AGPGART AGP Rate: 8x Fast
>>>>>>>> Writes: Disabled SBA: Enabled
>>>>>>>>
>>>>>>>> Kernel: 2.6.13-gentoo-r3 nvidia-kernel: 1.0.7676
>>>>>>>> nvidia-glx: 1.0.7676-r2
>>>>>>>>
>>>>>>>> I've also used nvidia-settings to check the card
>>>>>>>> temperature. 15mins after boot, nvidia-settings
>>>>>>>> reports:
>>>>>>>>
>>>>>>>> Core Temperature: 44C Ambient Temperature: 36C
>>>>>>>>
>>>>>>>> I've searched through the Gentoo forums for similar
>>>>>>>> problems, and this has been reported one or two
>>>>>>>> times, none of these people found a solution (or
>>>>>>>> posted about it). I looked on my motherboard for
>>>>>>>> capacitor decay (as described in another post) and
>>>>>>>> haven't found any. I also don't have X Composite
>>>>>>>> extensions enabled.
>>>>>>>>
>>>>>>>> Whenever the PC crashes, I can see the following in
>>>>>>>> /var/log/messages (I have to SSH to do this, the
>>>>>>>> machine is too frozen to launch a terminal locally)
>>>>>>>>
>>>>>>>> Nov 3 22:05:06 silver NVRM: Xid: 25, L0 -> L0 Nov 3
>>>>>>>> 22:05:06 silver NVRM: Xid: 6, PE0000 1f08 00000000
>>>>>>>> 00000000 00f1efeb 00000000 Nov 3 22:05:09 silver
>>>>>>>> NVRM: Xid: 8, Channel 00000020 Nov 3 22:05:17 silver
>>>>>>>> NVRM: Xid: 8, Channel 00000020
>>>>>>>>
>>>>>>>> etc...
>>>>>>>>
>>>>>>>> I've installed Windows on this machine and a few
>>>>>>>> games just to test - everything worked fine, so it
>>>>>>>> can't be a hardware problem.
>>>>>>>>
>>>>>>>> Any help would be greatly appreciated.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>> _______________________________________________ MLUG-list
>>>>>> mailing list [email protected]
>>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________ MLUG-list
>>>>> mailing list [email protected]
>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>>
>>>>>
>>>>
>>>> _______________________________________________ MLUG-list
>>>> mailing list [email protected]
>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>
>>
>> _______________________________________________ MLUG-list mailing
>> list [email protected]
>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
- --
Keith Vassallo
Registered GNU/Linux User #290991
http://www.keithvassallo.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDe31Jym3HAdrlsyERAkjtAJ0aJtY8HMCEdiUVCctVlsKA3aEo1QCfV/b6
93DAyQvHvrPbMfXjGee+0oI=
=XB7u
-----END PGP SIGNATURE-----
13461 execve("/usr/games/bin/doom3", ["doom3"], [/* 52 vars */]) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 brk(0) = 0x5c4000
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x2aaaaaac0000
13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
13461 open("/etc/ld.so.cache", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0644, st_size=103504, ...}) = 0
13461 mmap(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaaaaac1000
13461 close(3) = 0
13461 open("/lib/libdl.so.2", O_RDONLY) = 3
13461 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0"...,
640) = 640
13461 lseek(3, 624, SEEK_SET) = 624
13461 read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32)
= 32
13461 fstat(3, {st_mode=S_IFREG|0755, st_size=11280, ...}) = 0
13461 mmap(NULL, 1056984, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x2aaaaabc1000
13461 mprotect(0x2aaaaabc3000, 1048792, PROT_NONE) = 0
13461 mmap(0x2aaaaacc2000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x2aaaaacc2000
13461 close(3) = 0
13461 open("/lib/libc.so.6", O_RDONLY) = 3
13461 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\315"..., 640)
= 640
13461 lseek(3, 624, SEEK_SET) = 624
13461 read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32)
= 32
13461 fstat(3, {st_mode=S_IFREG|0755, st_size=1256224, ...}) = 0
13461 mmap(NULL, 2250120, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x2aaaaacc4000
13461 mprotect(0x2aaaaade0000, 1086856, PROT_NONE) = 0
13461 mmap(0x2aaaaaedf000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x2aaaaaedf000
13461 mmap(0x2aaaaaee5000, 17800, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaee5000
13461 close(3) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x2aaaaaeea000
13461 mprotect(0x2aaaaaedf000, 12288, PROT_READ) = 0
13461 mprotect(0x2aaaaabbf000, 4096, PROT_READ) = 0
13461 munmap(0x2aaaaaac1000, 103504) = 0
13461 open("/dev/urandom", O_RDONLY) = 3
13461 read(3, "yY\245\363\204\350\16\r", 8) = 8
13461 close(3) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/dev/tty", O_RDWR|O_NONBLOCK) = 3
13461 close(3) = 0
13461 brk(0) = 0x5c4000
13461 brk(0x5e5000) = 0x5e5000
13461 getuid() = 1000
13461 getgid() = 100
13461 geteuid() = 1000
13461 getegid() = 100
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/etc/mtab", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0644, st_size=367, ...}) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x2aaaaaac1000
13461 read(3, "/dev/sda3 / ext3 rw,noatime 0 0\n"..., 4096) = 367
13461 close(3) = 0
13461 munmap(0x2aaaaaac1000, 4096) = 0
13461 open("/proc/meminfo", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x2aaaaaac1000
13461 read(3, "MemTotal: 1535736 kB\nMemFre"..., 1024) = 676
13461 close(3) = 0
13461 munmap(0x2aaaaaac1000, 4096) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 stat("/home/keithvassallo", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 getpid() = 13461
13461 getppid() = 13460
13461 getpgrp() = 13460
13461 rt_sigaction(SIGCHLD, {0x434990, [], SA_RESTORER, 0x2aaaaacf3810},
{SIG_DFL}, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/usr/games/bin/doom3", O_RDONLY) = 3
13461 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0x7fffffbd5620) = -1 ENOTTY
(Inappropriate ioctl for device)
13461 lseek(3, 0, SEEK_CUR) = 0
13461 read(3, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 80) = 80
13461 lseek(3, 0, SEEK_SET) = 0
13461 getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
13461 dup2(3, 255) = 255
13461 close(3) = 0
13461 fcntl(255, F_SETFD, FD_CLOEXEC) = 0
13461 fcntl(255, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
13461 fstat(255, {st_mode=S_IFREG|0750, st_size=92, ...}) = 0
13461 lseek(255, 0, SEEK_CUR) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 read(255, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 92) = 92
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 stat("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 stat("/opt/doom3", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 chdir("/opt/doom3") = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_IGN}, 8) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {0x434990, [], SA_RESTORER,
0x2aaaaacf3810}, 8) = 0
13461 execve("/opt/doom3/doom.x86", ["./doom.x86"], [/* 53 vars */]) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 brk(0) = 0xa5a2000
13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
13461 open("tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/etc/ld.so.cache", O_RDONLY) = 3
13461 fstat64(0x3, 0xffffbc34) = 0
13461 mmap2(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x5556c000
13461 close(3) = 0
13461 open("/lib32/libpthread.so.0", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300B\0"..., 512)
= 512
13461 fstat64(0x3, 0xffffbca8) = 0
13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x55586000
13461 mmap2(NULL, 332928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x55587000
13461 mmap2(0x55595000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd) = 0x55595000
13461 mmap2(0x55597000, 267392, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55597000
13461 close(3) = 0
13461 open("tls/i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/lib32/libdl.so.2", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\v\0"...,
512) = 512
13461 fstat64(0x3, 0xffffbc8c) = 0
13461 mmap2(NULL, 12392, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x555d9000
13461 mmap2(0x555db000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x555db000
13461 close(3) = 0
13461 open("tls/i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/emul/linux/x86/usr/lib/libX11.so.6", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\24"..., 512)
= 512
13461 fstat64(0x3, 0xffffbc70) = 0
13461 mmap2(NULL, 826584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x555dd000
13461 mmap2(0x556a3000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc5) = 0x556a3000
13461 close(3) = 0
13461 open("tls/i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/emul/linux/x86/usr/lib/libXext.so.6", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\'\0\000"...,
512) = 512
13461 fstat64(0x3, 0xffffbc54) = 0
13461 mmap2(NULL, 55636, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x556a7000
13461 mmap2(0x556b4000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc) = 0x556b4000
13461 close(3) = 0
13461 open("tls/i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libstdc++.so.5", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\274\3"..., 512)
= 512
13461 fstat64(0x3, 0xffffbc38) = 0
13461 getcwd("/opt/doom3", 128) = 11
13461 mmap2(NULL, 753344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x556b5000
13461 mmap2(0x55753000, 86016, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9d) = 0x55753000
13461 mmap2(0x55768000, 20160, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55768000
13461 close(3) = 0
13461 open("tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/lib32/libm.so.6", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p3\0\000"...,
512) = 512
13461 fstat64(0x3, 0xffffbc1c) = 0
13461 mmap2(NULL, 139424, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x5576d000
13461 mmap2(0x5578e000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20) = 0x5578e000
13461 close(3) = 0
13461 open("tls/i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libgcc_s.so.1", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\25\0\000"...,
512) = 512
13461 fstat64(0x3, 0xffffbc00) = 0
13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x55790000
13461 getcwd("/opt/doom3", 128) = 11
13461 mmap2(NULL, 30464, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x55791000
13461 mmap2(0x55798000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0x55798000
13461 close(3) = 0
13461 open("tls/i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("tls/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
13461 open("/lib32/libc.so.6", O_RDONLY) = 3
13461 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pT\1\000"...,
512) = 512
13461 fstat64(0x3, 0xffffbbe4) = 0
13461 mmap2(NULL, 1150260, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x55799000
13461 mmap2(0x558ac000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x112) = 0x558ac000
13461 mmap2(0x558b0000, 7476, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x558b0000
13461 close(3) = 0
13461 mprotect(0x558ac000, 4096, PROT_READ) = 0
13461 munmap(0x5556c000, 103504) = 0
13461 brk(0) = 0xa5a2000
13461 brk(0xa5c3000) = 0xa5c3000
13461 brk(0) = 0xa5c3000
13461 set_thread_area(0xffffc50c) = 0
13461 getpid() = 13461
13461 rt_sigaction(SIGRTMIN, {0x5558f290, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigaction(SIGRT_1, {0x5558f3e0, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigaction(SIGRT_2, {0x5558f5d0, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, [RTMIN], NULL, 8) = 0
13461 rt_sigprocmask(SIG_UNBLOCK, [RT_1], NULL, 8) = 0
