-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Just as a follow up, I inserted another hard disk and installed SUSE
10.0. Installed the same version of X and kernel, as well as nvidia
kernel. I got exactly the same problem.
Keith
Keith Vassallo wrote:
> Andrew Cilia wrote:
>
>> when you say sounds, what type of sounds? Doom sounds or just
>> rubbish?
>
>
> Doom sounds.
>
>> You should be stracing the doom.x86 process.
>
>
> Done as instructed. The trace is attached.
>
>> Now, if you've soft rebooted and the screen came up garbled, then
>> some process is not talking nicely to the card and the problem
>> is persistent.
>
>
> I killed X and doom via SSH, and the monitor just turned itself
> off. I then tried to reboot (via SSH).. it looked like it started
> to reboot, but then the screen came on again and it was garbled -
> and nothing happened. After I rebooted (manually) the screen worked
> fine.
>
> Keith
>
>> On Wed, 2005-11-16 at 17:21 +0100, Keith Vassallo wrote:
>
>>> I launched Doom III and waited for it to freeze, then I ssh'ed
>>> into the system and ran top.
>>>
>>> The top most process was X (with some 99.9% CPU activity).
>>> Sometimes doom.x86 (the Doom III process, of course) would rise
>>> to the top for a few moments, but then go down again. The
>>> relevant lines from top:
>>>
>>> When X was on top: PID USER PR NI VIRT RES SHR S %CPU %MEM
>>> TIME+ COMMAND 11515 root 25 0 305m 32m 8824 R 99.8 2.2 0:45.56
>>> X 1 root 16 0 2548 536 452 S 0.0 0.0 0:01.15 init 2 root 34 19
>>> 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
>>>
>>> When doom.x86 was on top: PID USER PR NI VIRT RES SHR S %CPU
>>> %MEM TIME+ COMMAND 13237 keithvas 23 0 802m 715m 8320 R 97.3
>>> 47.7 2:04.93 doom.x86 11515 root 25 0 305m 32m 8824 R 2.4 2.2
>>> 0:36.50 X 13235 keithvas 16 0 10424 1276 928 R 0.2 0.1 0:00.38
>>> top
>>>
>>> My load average just kept rising, and rising. At a point it was
>>> 20.86, 8.14, 3.16 (whatever that means).
>>>
>>> Before the game freezes, the top most process is doom.x86 (with
>>> around 85% CPU usage) and X comes in at third or fourth place.
>>>
>>>
>>> Whilst the game is frozen, I occasionally here sound from my
>>> speakers. Other times I hear nothing. When I'm hearing sounds,
>>> I'm able to type in commands via SSH. When I'm not hearing
>>> sounds, nothing appears and the system grinds to a halt. This
>>> suggests that (perhaps) the system tries to recover but then is
>>> frozen again.
>>>
>>> When I run strace on X, I keep getting the following:
>>> rt_sigreturn(0xe) = 36984 --- SIGALRM (Alarm clock) @ 0 (0) ---
>>> rt_sigreturn(0xe) = 36984
>>>
>>> Doom III spawns several processes, here's what they say: [
>>> Process PID=13250 runs in 32 bit mode. ] select(19, [18], NULL,
>>> NULL, NULL
>>>
>>> [ Process PID=13251 runs in 32 bit mode. ] getppid() = 13250
>>> poll([{fd=15, events=POLLIN}], 1, 2000) = 0
>>>
>>> [ Process PID=13253 runs in 32 bit mode. ]
>>> gettimeofday({2811813141633945, 586448462527099936}, NULL) = 0
>>> nanosleep({38654705664000000, 586448610090393576}, NULL) = 0
>>> gettimeofday({2868712868371353, 586448630030824480}, NULL) = 0
>>>
>>> I tried to reboot the PC. I did kill -9 (the X pid) and kill -9
>>> (the doom III pid), but when I looked at the machine's monitor
>>> it just turned off (i.e. no output from the video card). I then
>>> tried to reboot via SSH. The system looked like it tried to
>>> reboot, but then a garbled screen appeared and nothing more
>>> happened.
>>>
>>> The second time I tried this, kill -9 (the X pid) stopped sound
>>> coming from my speakers, but the image just froze (i.e.
>>> frozen, not turned off). I then killed doom, but the machine
>>> remained frozen. After this, the machine completely froze (i.e.
>>> no commands, even from SSH).
>>>
>>> Keith
>>>
>>> Andrew Cilia wrote:
>>>
>>>> Keith, just a point on something you wrote in an earlier
>>>> email. If you can ssh in, then the system has not crashed as
>>>> such. It would seem that your video subsystem is stuck. Given
>>>> that you can get in via ssh, is there anything that is
>>>> hogging the CPU that you can see via top. If so, get an
>>>> strace on it as this will help in debugging.
>>>>
>>>> Another thing. Are you running in SMP mode?
>>>>
>>>> subsystem is On Wed, 2005-11-16 at 07:26 +0100, Keith
>>>> Vassallo wrote:
>>>>
>>>>
>>>>> When I bought the card, I was using kernel 2.6.12, I
>>>>> re-compiled that, and it still didn't work. I also compiled
>>>>> 2.6.13 - still didn't work.
>>>>>
>>>>> glxgears works. Also, some games like GTA: Vice City work
>>>>> with no problems. Also, If I set the quality of graphics in
>>>>> Doom III to medium, the game works.
>>>>>
>>>>> It seems like only very intensive use makes the box die. It
>>>>> could be something to do with the bug Andrew mentioned
>>>>> earlier (the bug is only a problem with very intensive
>>>>> use). It can't be a hardware problem, Windows worked.
>>>>>
>>>>> Keith
>>>>>
>>>>> Jean Azzopardi wrote:
>>>>>
>>>>>
>>>>>> I will not pretend to be an expert on this, but have you
>>>>>> tried recompiling the kernel? Also. do simpler 3D apps
>>>>>> work? Such as glxgears? Try running glxgears in a
>>>>>> terminal...
>>>>>>
>>>>>> On Tuesday 15 November 2005 6:30 pm, Keith Vassallo
>>>>>> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> The messages I get from dmesg after start-up show no
>>>>>>> errors - just that AGPART is being loaded, finds a
>>>>>>> graphics card and everything seems normal.
>>>>>>>
>>>>>>> I had already checked out the thread you pointed me to.
>>>>>>> The thread provides a patch to fix the problem, but
>>>>>>> I'm supposed to already have that patch - Gentoo have
>>>>>>> included it in their ebuild (of which I have the
>>>>>>> latest, 7676).
>>>>>>>
>>>>>>> I tried to figure out what they're talking about when
>>>>>>> they mention global_flush_tlb(), and found this
>>>>>>> interesting post:
>>>>>>> http://marc.theaimsgroup.com/?l=linux-kernel&m=112928307319954&w=2
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> It seems, as is also said in the nvidia post, that this
>>>>>>> is being worked on in kernel 2.6.14. Unfortunately,
>>>>>>> the thread I found mentions delays - not total freezes
>>>>>>> - being caused by this "bug". The patch is against
>>>>>>> 2.6.14-rc4. I don't totally understand kernel
>>>>>>> terminology - but if the patch is against rc4, does
>>>>>>> that mean it will be included in rc5? Whichever it's
>>>>>>> included in, the latest (testing) kernel available on
>>>>>>> Portage is 2.6.14-r2.
>>>>>>>
>>>>>>> Seems like this will be a waiting game, unless anyone
>>>>>>> else has suggestions.
>>>>>>>
>>>>>>> Keith
>>>>>>>
>>>>>>> Andrew Cilia wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Do you get any messages after agpart module kicks in
>>>>>>>> during startup? Did you try some other forums besides
>>>>>>>> gentoo? For example, I found this:
>>>>>>>>
>>>>>>>> http://www.nvnews.net/vbulletin/showthread.php?t=57990
>>>>>>>>
>>>>>>>>
>>>>>>>> Cheers
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, 2005-11-15 at 16:01 +0100, Keith Vassallo
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hey Guys,
>>>>>>>>>
>>>>>>>>> I've recently upgraded to an XFX GeForce 6800 GT
>>>>>>>>> from my previous card, a GeForce FX 5200. Since
>>>>>>>>> having done so, I'm having problems playing
>>>>>>>>>
>>>>>>>>>
>>>>>> games.
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> When starting Doom3 in "Ultra high" or "high"
>>>>>>>>> quality mode, the game locks up either seconds, or
>>>>>>>>> minutes, after the game begins. The whole system
>>>>>>>>> freezes, neither CTRL+ALT+BACKSPACE nor anything
>>>>>>>>> else works. Starting doom in "medium" quality mode
>>>>>>>>> seems to stop the problem from happening, although
>>>>>>>>> I haven't played the game for longer then 30mins.
>>>>>>>>> When starting Half Life 2, the game freezes a few
>>>>>>>>> seconds after the menu is displayed. With
>>>>>>>>> Counterstrike: Source, the game loads a map, then
>>>>>>>>> sends me back to the desktop.
>>>>>>>>>
>>>>>>>>> Here's some information you may need:
>>>>>>>>>
>>>>>>>>> Gentoo running amd64 on AMD Athlon 64 3000+ (Socket
>>>>>>>>> 939) XFX GeForce 6800 GT (AGP) 1.5GB DDR RAM
>>>>>>>>>
>>>>>>>>> cat /proc/driver/nvidia/agp/status:
>>>>>>>>>
>>>>>>>>> Status: Enabled Driver: AGPGART AGP Rate: 8x Fast
>>>>>>>>> Writes: Disabled SBA: Enabled
>>>>>>>>>
>>>>>>>>> Kernel: 2.6.13-gentoo-r3 nvidia-kernel: 1.0.7676
>>>>>>>>> nvidia-glx: 1.0.7676-r2
>>>>>>>>>
>>>>>>>>> I've also used nvidia-settings to check the card
>>>>>>>>> temperature. 15mins after boot, nvidia-settings
>>>>>>>>> reports:
>>>>>>>>>
>>>>>>>>> Core Temperature: 44C Ambient Temperature: 36C
>>>>>>>>>
>>>>>>>>> I've searched through the Gentoo forums for similar
>>>>>>>>> problems, and this has been reported one or two
>>>>>>>>> times, none of these people found a solution (or
>>>>>>>>> posted about it). I looked on my motherboard for
>>>>>>>>> capacitor decay (as described in another post) and
>>>>>>>>> haven't found any. I also don't have X Composite
>>>>>>>>> extensions enabled.
>>>>>>>>>
>>>>>>>>> Whenever the PC crashes, I can see the following in
>>>>>>>>> /var/log/messages (I have to SSH to do this, the
>>>>>>>>> machine is too frozen to launch a terminal locally)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Nov 3 22:05:06 silver NVRM: Xid: 25, L0 -> L0 Nov 3
>>>>>>>>> 22:05:06 silver NVRM: Xid: 6, PE0000 1f08 00000000
>>>>>>>>> 00000000 00f1efeb 00000000 Nov 3 22:05:09 silver
>>>>>>>>> NVRM: Xid: 8, Channel 00000020 Nov 3 22:05:17
>>>>>>>>> silver NVRM: Xid: 8, Channel 00000020
>>>>>>>>>
>>>>>>>>> etc...
>>>>>>>>>
>>>>>>>>> I've installed Windows on this machine and a few
>>>>>>>>> games just to test - everything worked fine, so it
>>>>>>>>> can't be a hardware problem.
>>>>>>>>>
>>>>>>>>> Any help would be greatly appreciated.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> MLUG-list mailing list [email protected]
>>>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________ MLUG-list
>>>>>> mailing list [email protected]
>>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>>>
>>>>>>
>>>>> _______________________________________________ MLUG-list
>>>>> mailing list [email protected]
>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>>>>>
>>> _______________________________________________ MLUG-list
>>> mailing list [email protected]
>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>
>
>
>
> -- Keith Vassallo Registered GNU/Linux User #290991
> http://www.keithvassallo.net
>
- -------------------------
13461 execve("/usr/games/bin/doom3", ["doom3"], [/* 52 vars */]) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 brk(0) = 0x5c4000
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac0000
13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
directory)
13461 open("/etc/ld.so.cache", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0644, st_size=103504, ...}) = 0
13461 mmap(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaaaaac1000
13461 close(3) = 0
13461 open("/lib/libdl.so.2", O_RDONLY) = 3
13461 read(3,
"\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0"..., 640) = 640
13461 lseek(3, 624, SEEK_SET) = 624
13461 read(3,
"\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32
13461 fstat(3, {st_mode=S_IFREG|0755, st_size=11280, ...}) = 0
13461 mmap(NULL, 1056984, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2aaaaabc1000
13461 mprotect(0x2aaaaabc3000, 1048792, PROT_NONE) = 0
13461 mmap(0x2aaaaacc2000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x2aaaaacc2000
13461 close(3) = 0
13461 open("/lib/libc.so.6", O_RDONLY) = 3
13461 read(3,
"\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\315"..., 640) = 640
13461 lseek(3, 624, SEEK_SET) = 624
13461 read(3,
"\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32
13461 fstat(3, {st_mode=S_IFREG|0755, st_size=1256224, ...}) = 0
13461 mmap(NULL, 2250120, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2aaaaacc4000
13461 mprotect(0x2aaaaade0000, 1086856, PROT_NONE) = 0
13461 mmap(0x2aaaaaedf000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x2aaaaaedf000
13461 mmap(0x2aaaaaee5000, 17800, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaee5000
13461 close(3) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaeea000
13461 mprotect(0x2aaaaaedf000, 12288, PROT_READ) = 0
13461 mprotect(0x2aaaaabbf000, 4096, PROT_READ) = 0
13461 munmap(0x2aaaaaac1000, 103504) = 0
13461 open("/dev/urandom", O_RDONLY) = 3
13461 read(3, "yY\245\363\204\350\16\r", 8) = 8
13461 close(3) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/dev/tty", O_RDWR|O_NONBLOCK) = 3
13461 close(3) = 0
13461 brk(0) = 0x5c4000
13461 brk(0x5e5000) = 0x5e5000
13461 getuid() = 1000
13461 getgid() = 100
13461 geteuid() = 1000
13461 getegid() = 100
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/etc/mtab", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0644, st_size=367, ...}) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac1000
13461 read(3, "/dev/sda3 / ext3 rw,noatime 0 0\n"..., 4096) = 367
13461 close(3) = 0
13461 munmap(0x2aaaaaac1000, 4096) = 0
13461 open("/proc/meminfo", O_RDONLY) = 3
13461 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac1000
13461 read(3, "MemTotal: 1535736 kB\nMemFre"..., 1024) = 676
13461 close(3) = 0
13461 munmap(0x2aaaaaac1000, 4096) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 stat("/home/keithvassallo", {st_mode=S_IFDIR|0755, st_size=4096,
...}) = 0
13461 stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 getpid() = 13461
13461 getppid() = 13460
13461 getpgrp() = 13460
13461 rt_sigaction(SIGCHLD, {0x434990, [], SA_RESTORER,
0x2aaaaacf3810}, {SIG_DFL}, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 open("/usr/games/bin/doom3", O_RDONLY) = 3
13461 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0x7fffffbd5620) = -1
ENOTTY (Inappropriate ioctl for device)
13461 lseek(3, 0, SEEK_CUR) = 0
13461 read(3, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 80) = 80
13461 lseek(3, 0, SEEK_SET) = 0
13461 getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
13461 dup2(3, 255) = 255
13461 close(3) = 0
13461 fcntl(255, F_SETFD, FD_CLOEXEC) = 0
13461 fcntl(255, F_GETFL) = 0x8000 (flags
O_RDONLY|O_LARGEFILE)
13461 fstat(255, {st_mode=S_IFREG|0750, st_size=92, ...}) = 0
13461 lseek(255, 0, SEEK_CUR) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 read(255, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 92) = 92
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 stat("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 stat("/opt/doom3", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
13461 chdir("/opt/doom3") = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_IGN}, 8) = 0
13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {0x434990, [], SA_RESTORER,
0x2aaaaacf3810}, 8) = 0
13461 execve("/opt/doom3/doom.x86", ["./doom.x86"], [/* 53 vars */]) = 0
13461 uname({sys="Linux", node="silver", ...}) = 0
13461 brk(0) = 0xa5a2000
13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
directory)
13461 open("tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No
such file or directory)
13461 open("tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/etc/ld.so.cache", O_RDONLY) = 3
13461 fstat64(0x3, 0xffffbc34) = 0
13461 mmap2(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x5556c000
13461 close(3) = 0
13461 open("/lib32/libpthread.so.0", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300B\0"..., 512) = 512
13461 fstat64(0x3, 0xffffbca8) = 0
13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x55586000
13461 mmap2(NULL, 332928, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55587000
13461 mmap2(0x55595000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd) = 0x55595000
13461 mmap2(0x55597000, 267392, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55597000
13461 close(3) = 0
13461 open("tls/i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/lib32/libdl.so.2", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\v\0"..., 512) = 512
13461 fstat64(0x3, 0xffffbc8c) = 0
13461 mmap2(NULL, 12392, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x555d9000
13461 mmap2(0x555db000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x555db000
13461 close(3) = 0
13461 open("tls/i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/emul/linux/x86/usr/lib/libX11.so.6", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\24"..., 512) = 512
13461 fstat64(0x3, 0xffffbc70) = 0
13461 mmap2(NULL, 826584, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x555dd000
13461 mmap2(0x556a3000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc5) = 0x556a3000
13461 close(3) = 0
13461 open("tls/i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No
such file or directory)
13461 open("tls/i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/emul/linux/x86/usr/lib/libXext.so.6", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\'\0\000"..., 512) = 512
13461 fstat64(0x3, 0xffffbc54) = 0
13461 mmap2(NULL, 55636, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x556a7000
13461 mmap2(0x556b4000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc) = 0x556b4000
13461 close(3) = 0
13461 open("tls/i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No
such file or directory)
13461 open("tls/i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("libstdc++.so.5", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\274\3"..., 512) = 512
13461 fstat64(0x3, 0xffffbc38) = 0
13461 getcwd("/opt/doom3", 128) = 11
13461 mmap2(NULL, 753344, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x556b5000
13461 mmap2(0x55753000, 86016, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9d) = 0x55753000
13461 mmap2(0x55768000, 20160, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55768000
13461 close(3) = 0
13461 open("tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/lib32/libm.so.6", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p3\0\000"..., 512) = 512
13461 fstat64(0x3, 0xffffbc1c) = 0
13461 mmap2(NULL, 139424, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5576d000
13461 mmap2(0x5578e000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20) = 0x5578e000
13461 close(3) = 0
13461 open("tls/i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No
such file or directory)
13461 open("tls/i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("libgcc_s.so.1", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\25\0\000"..., 512) = 512
13461 fstat64(0x3, 0xffffbc00) = 0
13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x55790000
13461 getcwd("/opt/doom3", 128) = 11
13461 mmap2(NULL, 30464, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55791000
13461 mmap2(0x55798000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0x55798000
13461 close(3) = 0
13461 open("tls/i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
13461 open("tls/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("tls/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
13461 open("i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
13461 open("/lib32/libc.so.6", O_RDONLY) = 3
13461 read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pT\1\000"..., 512) = 512
13461 fstat64(0x3, 0xffffbbe4) = 0
13461 mmap2(NULL, 1150260, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55799000
13461 mmap2(0x558ac000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x112) = 0x558ac000
13461 mmap2(0x558b0000, 7476, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x558b0000
13461 close(3) = 0
13461 mprotect(0x558ac000, 4096, PROT_READ) = 0
13461 munmap(0x5556c000, 103504) = 0
13461 brk(0) = 0xa5a2000
13461 brk(0xa5c3000) = 0xa5c3000
13461 brk(0) = 0xa5c3000
13461 set_thread_area(0xffffc50c) = 0
13461 getpid() = 13461
13461 rt_sigaction(SIGRTMIN, {0x5558f290, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigaction(SIGRT_1, {0x5558f3e0, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigaction(SIGRT_2, {0x5558f5d0, [],
SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
13461 rt_sigprocmask(SIG_BLOCK, [RTMIN], NULL, 8) = 0
13461 rt_sigprocmask(SIG_UNBLOCK, [RT_1], NULL, 8) = 0
- -------------------------
_______________________________________________
MLUG-list mailing list
[email protected]
http://mailserv.megabyte.net/mailman/listinfo/mlug-list
- --
Keith Vassallo
Registered GNU/Linux User #290991
http://www.keithvassallo.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDfi3uym3HAdrlsyERAjk/AJ4zpLfy5hoo9RxFjdFB2eWUbivunwCfarfe
xY2HpFiNsw9GN5mgwca49XA=
=SsQV
-----END PGP SIGNATURE-----
