Did you install nvidia from their website source or from the SUSE YOU?
So you changed the default config of the system from which SUSE normally
installs right?
On Friday 18 November 2005 8:39 pm, Keith Vassallo wrote:
> Just as a follow up, I inserted another hard disk and installed SUSE
> 10.0. Installed the same version of X and kernel, as well as nvidia
> kernel. I got exactly the same problem.
>
> Keith
>
> Keith Vassallo wrote:
>
> > Andrew Cilia wrote:
> >
> >> when you say sounds, what type of sounds? Doom sounds or just
> >> rubbish?
> >
> >
> > Doom sounds.
> >
> >> You should be stracing the doom.x86 process.
> >
> >
> > Done as instructed. The trace is attached.
> >
> >> Now, if you've soft rebooted and the screen came up garbled, then
> >> some process is not talking nicely to the card and the problem
> >> is persistent.
> >
> >
> > I killed X and doom via SSH, and the monitor just turned itself
> > off. I then tried to reboot (via SSH).. it looked like it started
> > to reboot, but then the screen came on again and it was garbled -
> > and nothing happened. After I rebooted (manually) the screen worked
> > fine.
> >
> > Keith
> >
> >> On Wed, 2005-11-16 at 17:21 +0100, Keith Vassallo wrote:
> >
> >>> I launched Doom III and waited for it to freeze, then I ssh'ed
> >>> into the system and ran top.
> >>>
> >>> The top most process was X (with some 99.9% CPU activity).
> >>> Sometimes doom.x86 (the Doom III process, of course) would rise
> >>> to the top for a few moments, but then go down again. The
> >>> relevant lines from top:
> >>>
> >>> When X was on top: PID USER PR NI VIRT RES SHR S %CPU %MEM
> >>> TIME+ COMMAND 11515 root 25 0 305m 32m 8824 R 99.8 2.2 0:45.56
> >>> X 1 root 16 0 2548 536 452 S 0.0 0.0 0:01.15 init 2 root 34 19
> >>> 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
> >>>
> >>> When doom.x86 was on top: PID USER PR NI VIRT RES SHR S %CPU
> >>> %MEM TIME+ COMMAND 13237 keithvas 23 0 802m 715m 8320 R 97.3
> >>> 47.7 2:04.93 doom.x86 11515 root 25 0 305m 32m 8824 R 2.4 2.2
> >>> 0:36.50 X 13235 keithvas 16 0 10424 1276 928 R 0.2 0.1 0:00.38
> >>> top
> >>>
> >>> My load average just kept rising, and rising. At a point it was
> >>> 20.86, 8.14, 3.16 (whatever that means).
> >>>
> >>> Before the game freezes, the top most process is doom.x86 (with
> >>> around 85% CPU usage) and X comes in at third or fourth place.
> >>>
> >>>
> >>> Whilst the game is frozen, I occasionally here sound from my
> >>> speakers. Other times I hear nothing. When I'm hearing sounds,
> >>> I'm able to type in commands via SSH. When I'm not hearing
> >>> sounds, nothing appears and the system grinds to a halt. This
> >>> suggests that (perhaps) the system tries to recover but then is
> >>> frozen again.
> >>>
> >>> When I run strace on X, I keep getting the following:
> >>> rt_sigreturn(0xe) = 36984 --- SIGALRM (Alarm clock) @ 0 (0) ---
> >>> rt_sigreturn(0xe) = 36984
> >>>
> >>> Doom III spawns several processes, here's what they say: [
> >>> Process PID=13250 runs in 32 bit mode. ] select(19, [18], NULL,
> >>> NULL, NULL
> >>>
> >>> [ Process PID=13251 runs in 32 bit mode. ] getppid() = 13250
> >>> poll([{fd=15, events=POLLIN}], 1, 2000) = 0
> >>>
> >>> [ Process PID=13253 runs in 32 bit mode. ]
> >>> gettimeofday({2811813141633945, 586448462527099936}, NULL) = 0
> >>> nanosleep({38654705664000000, 586448610090393576}, NULL) = 0
> >>> gettimeofday({2868712868371353, 586448630030824480}, NULL) = 0
> >>>
> >>> I tried to reboot the PC. I did kill -9 (the X pid) and kill -9
> >>> (the doom III pid), but when I looked at the machine's monitor
> >>> it just turned off (i.e. no output from the video card). I then
> >>> tried to reboot via SSH. The system looked like it tried to
> >>> reboot, but then a garbled screen appeared and nothing more
> >>> happened.
> >>>
> >>> The second time I tried this, kill -9 (the X pid) stopped sound
> >>> coming from my speakers, but the image just froze (i.e.
> >>> frozen, not turned off). I then killed doom, but the machine
> >>> remained frozen. After this, the machine completely froze (i.e.
> >>> no commands, even from SSH).
> >>>
> >>> Keith
> >>>
> >>> Andrew Cilia wrote:
> >>>
> >>>> Keith, just a point on something you wrote in an earlier
> >>>> email. If you can ssh in, then the system has not crashed as
> >>>> such. It would seem that your video subsystem is stuck. Given
> >>>> that you can get in via ssh, is there anything that is
> >>>> hogging the CPU that you can see via top. If so, get an
> >>>> strace on it as this will help in debugging.
> >>>>
> >>>> Another thing. Are you running in SMP mode?
> >>>>
> >>>> subsystem is On Wed, 2005-11-16 at 07:26 +0100, Keith
> >>>> Vassallo wrote:
> >>>>
> >>>>
> >>>>> When I bought the card, I was using kernel 2.6.12, I
> >>>>> re-compiled that, and it still didn't work. I also compiled
> >>>>> 2.6.13 - still didn't work.
> >>>>>
> >>>>> glxgears works. Also, some games like GTA: Vice City work
> >>>>> with no problems. Also, If I set the quality of graphics in
> >>>>> Doom III to medium, the game works.
> >>>>>
> >>>>> It seems like only very intensive use makes the box die. It
> >>>>> could be something to do with the bug Andrew mentioned
> >>>>> earlier (the bug is only a problem with very intensive
> >>>>> use). It can't be a hardware problem, Windows worked.
> >>>>>
> >>>>> Keith
> >>>>>
> >>>>> Jean Azzopardi wrote:
> >>>>>
> >>>>>
> >>>>>> I will not pretend to be an expert on this, but have you
> >>>>>> tried recompiling the kernel? Also. do simpler 3D apps
> >>>>>> work? Such as glxgears? Try running glxgears in a
> >>>>>> terminal...
> >>>>>>
> >>>>>> On Tuesday 15 November 2005 6:30 pm, Keith Vassallo
> >>>>>> wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> The messages I get from dmesg after start-up show no
> >>>>>>> errors - just that AGPART is being loaded, finds a
> >>>>>>> graphics card and everything seems normal.
> >>>>>>>
> >>>>>>> I had already checked out the thread you pointed me to.
> >>>>>>> The thread provides a patch to fix the problem, but
> >>>>>>> I'm supposed to already have that patch - Gentoo have
> >>>>>>> included it in their ebuild (of which I have the
> >>>>>>> latest, 7676).
> >>>>>>>
> >>>>>>> I tried to figure out what they're talking about when
> >>>>>>> they mention global_flush_tlb(), and found this
> >>>>>>> interesting post:
> >>>>>>> http://marc.theaimsgroup.com/?l=linux-kernel&m=112928307319954&w=2
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> It seems, as is also said in the nvidia post, that this
> >>>>>>> is being worked on in kernel 2.6.14. Unfortunately,
> >>>>>>> the thread I found mentions delays - not total freezes
> >>>>>>> - being caused by this "bug". The patch is against
> >>>>>>> 2.6.14-rc4. I don't totally understand kernel
> >>>>>>> terminology - but if the patch is against rc4, does
> >>>>>>> that mean it will be included in rc5? Whichever it's
> >>>>>>> included in, the latest (testing) kernel available on
> >>>>>>> Portage is 2.6.14-r2.
> >>>>>>>
> >>>>>>> Seems like this will be a waiting game, unless anyone
> >>>>>>> else has suggestions.
> >>>>>>>
> >>>>>>> Keith
> >>>>>>>
> >>>>>>> Andrew Cilia wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> Do you get any messages after agpart module kicks in
> >>>>>>>> during startup? Did you try some other forums besides
> >>>>>>>> gentoo? For example, I found this:
> >>>>>>>>
> >>>>>>>> http://www.nvnews.net/vbulletin/showthread.php?t=57990
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Cheers
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On Tue, 2005-11-15 at 16:01 +0100, Keith Vassallo
> >>>>>>>> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Hey Guys,
> >>>>>>>>>
> >>>>>>>>> I've recently upgraded to an XFX GeForce 6800 GT
> >>>>>>>>> from my previous card, a GeForce FX 5200. Since
> >>>>>>>>> having done so, I'm having problems playing
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> games.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> When starting Doom3 in "Ultra high" or "high"
> >>>>>>>>> quality mode, the game locks up either seconds, or
> >>>>>>>>> minutes, after the game begins. The whole system
> >>>>>>>>> freezes, neither CTRL+ALT+BACKSPACE nor anything
> >>>>>>>>> else works. Starting doom in "medium" quality mode
> >>>>>>>>> seems to stop the problem from happening, although
> >>>>>>>>> I haven't played the game for longer then 30mins.
> >>>>>>>>> When starting Half Life 2, the game freezes a few
> >>>>>>>>> seconds after the menu is displayed. With
> >>>>>>>>> Counterstrike: Source, the game loads a map, then
> >>>>>>>>> sends me back to the desktop.
> >>>>>>>>>
> >>>>>>>>> Here's some information you may need:
> >>>>>>>>>
> >>>>>>>>> Gentoo running amd64 on AMD Athlon 64 3000+ (Socket
> >>>>>>>>> 939) XFX GeForce 6800 GT (AGP) 1.5GB DDR RAM
> >>>>>>>>>
> >>>>>>>>> cat /proc/driver/nvidia/agp/status:
> >>>>>>>>>
> >>>>>>>>> Status: Enabled Driver: AGPGART AGP Rate: 8x Fast
> >>>>>>>>> Writes: Disabled SBA: Enabled
> >>>>>>>>>
> >>>>>>>>> Kernel: 2.6.13-gentoo-r3 nvidia-kernel: 1.0.7676
> >>>>>>>>> nvidia-glx: 1.0.7676-r2
> >>>>>>>>>
> >>>>>>>>> I've also used nvidia-settings to check the card
> >>>>>>>>> temperature. 15mins after boot, nvidia-settings
> >>>>>>>>> reports:
> >>>>>>>>>
> >>>>>>>>> Core Temperature: 44C Ambient Temperature: 36C
> >>>>>>>>>
> >>>>>>>>> I've searched through the Gentoo forums for similar
> >>>>>>>>> problems, and this has been reported one or two
> >>>>>>>>> times, none of these people found a solution (or
> >>>>>>>>> posted about it). I looked on my motherboard for
> >>>>>>>>> capacitor decay (as described in another post) and
> >>>>>>>>> haven't found any. I also don't have X Composite
> >>>>>>>>> extensions enabled.
> >>>>>>>>>
> >>>>>>>>> Whenever the PC crashes, I can see the following in
> >>>>>>>>> /var/log/messages (I have to SSH to do this, the
> >>>>>>>>> machine is too frozen to launch a terminal locally)
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Nov 3 22:05:06 silver NVRM: Xid: 25, L0 -> L0 Nov 3
> >>>>>>>>> 22:05:06 silver NVRM: Xid: 6, PE0000 1f08 00000000
> >>>>>>>>> 00000000 00f1efeb 00000000 Nov 3 22:05:09 silver
> >>>>>>>>> NVRM: Xid: 8, Channel 00000020 Nov 3 22:05:17
> >>>>>>>>> silver NVRM: Xid: 8, Channel 00000020
> >>>>>>>>>
> >>>>>>>>> etc...
> >>>>>>>>>
> >>>>>>>>> I've installed Windows on this machine and a few
> >>>>>>>>> games just to test - everything worked fine, so it
> >>>>>>>>> can't be a hardware problem.
> >>>>>>>>>
> >>>>>>>>> Any help would be greatly appreciated.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> MLUG-list mailing list [email protected]
> >>>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> _______________________________________________ MLUG-list
> >>>>>> mailing list [email protected]
> >>>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
> >>>>>>
> >>>>>>
> >>>>> _______________________________________________ MLUG-list
> >>>>> mailing list [email protected]
> >>>>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
> >>>>>
> >>> _______________________________________________ MLUG-list
> >>> mailing list [email protected]
> >>> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
> >
> >
> >
> >
> > -- Keith Vassallo Registered GNU/Linux User #290991
> > http://www.keithvassallo.net
> >
>
> -------------------------
>
> 13461 execve("/usr/games/bin/doom3", ["doom3"], [/* 52 vars */]) = 0
> 13461 uname({sys="Linux", node="silver", ...}) = 0
> 13461 brk(0) = 0x5c4000
> 13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac0000
> 13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
> directory)
> 13461 open("/etc/ld.so.cache", O_RDONLY) = 3
> 13461 fstat(3, {st_mode=S_IFREG|0644, st_size=103504, ...}) = 0
> 13461 mmap(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaaaaac1000
> 13461 close(3) = 0
> 13461 open("/lib/libdl.so.2", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\17\0"..., 640) = 640
> 13461 lseek(3, 624, SEEK_SET) = 624
> 13461 read(3,
> "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32
> 13461 fstat(3, {st_mode=S_IFREG|0755, st_size=11280, ...}) = 0
> 13461 mmap(NULL, 1056984, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2aaaaabc1000
> 13461 mprotect(0x2aaaaabc3000, 1048792, PROT_NONE) = 0
> 13461 mmap(0x2aaaaacc2000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x2aaaaacc2000
> 13461 close(3) = 0
> 13461 open("/lib/libc.so.6", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\315"..., 640) = 640
> 13461 lseek(3, 624, SEEK_SET) = 624
> 13461 read(3,
> "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\4\0\0\0"..., 32) = 32
> 13461 fstat(3, {st_mode=S_IFREG|0755, st_size=1256224, ...}) = 0
> 13461 mmap(NULL, 2250120, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2aaaaacc4000
> 13461 mprotect(0x2aaaaade0000, 1086856, PROT_NONE) = 0
> 13461 mmap(0x2aaaaaedf000, 24576, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x2aaaaaedf000
> 13461 mmap(0x2aaaaaee5000, 17800, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaee5000
> 13461 close(3) = 0
> 13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaeea000
> 13461 mprotect(0x2aaaaaedf000, 12288, PROT_READ) = 0
> 13461 mprotect(0x2aaaaabbf000, 4096, PROT_READ) = 0
> 13461 munmap(0x2aaaaaac1000, 103504) = 0
> 13461 open("/dev/urandom", O_RDONLY) = 3
> 13461 read(3, "yY\245\363\204\350\16\r", 8) = 8
> 13461 close(3) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 open("/dev/tty", O_RDWR|O_NONBLOCK) = 3
> 13461 close(3) = 0
> 13461 brk(0) = 0x5c4000
> 13461 brk(0x5e5000) = 0x5e5000
> 13461 getuid() = 1000
> 13461 getgid() = 100
> 13461 geteuid() = 1000
> 13461 getegid() = 100
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 open("/etc/mtab", O_RDONLY) = 3
> 13461 fstat(3, {st_mode=S_IFREG|0644, st_size=367, ...}) = 0
> 13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac1000
> 13461 read(3, "/dev/sda3 / ext3 rw,noatime 0 0\n"..., 4096) = 367
> 13461 close(3) = 0
> 13461 munmap(0x2aaaaaac1000, 4096) = 0
> 13461 open("/proc/meminfo", O_RDONLY) = 3
> 13461 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> 13461 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaaaac1000
> 13461 read(3, "MemTotal: 1535736 kB\nMemFre"..., 1024) = 676
> 13461 close(3) = 0
> 13461 munmap(0x2aaaaaac1000, 4096) = 0
> 13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
> 13461 uname({sys="Linux", node="silver", ...}) = 0
> 13461 stat("/home/keithvassallo", {st_mode=S_IFDIR|0755, st_size=4096,
> ...}) = 0
> 13461 stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
> 13461 getpid() = 13461
> 13461 getppid() = 13460
> 13461 getpgrp() = 13460
> 13461 rt_sigaction(SIGCHLD, {0x434990, [], SA_RESTORER,
> 0x2aaaaacf3810}, {SIG_DFL}, 8) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 open("/usr/games/bin/doom3", O_RDONLY) = 3
> 13461 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0x7fffffbd5620) = -1
> ENOTTY (Inappropriate ioctl for device)
> 13461 lseek(3, 0, SEEK_CUR) = 0
> 13461 read(3, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 80) = 80
> 13461 lseek(3, 0, SEEK_SET) = 0
> 13461 getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
> 13461 dup2(3, 255) = 255
> 13461 close(3) = 0
> 13461 fcntl(255, F_SETFD, FD_CLOEXEC) = 0
> 13461 fcntl(255, F_GETFL) = 0x8000 (flags
> O_RDONLY|O_LARGEFILE)
> 13461 fstat(255, {st_mode=S_IFREG|0750, st_size=92, ...}) = 0
> 13461 lseek(255, 0, SEEK_CUR) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 read(255, "#!/bin/sh\ncd \"/opt/doom3\"\nexport"..., 92) = 92
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 stat("/opt", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
> 13461 stat("/opt/doom3", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
> 13461 chdir("/opt/doom3") = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, NULL, [RTMIN], 8) = 0
> 13461 rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
> 13461 rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_IGN}, 8) = 0
> 13461 rt_sigaction(SIGCHLD, {SIG_DFL}, {0x434990, [], SA_RESTORER,
> 0x2aaaaacf3810}, 8) = 0
> 13461 execve("/opt/doom3/doom.x86", ["./doom.x86"], [/* 53 vars */]) = 0
> 13461 uname({sys="Linux", node="silver", ...}) = 0
> 13461 brk(0) = 0xa5a2000
> 13461 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
> directory)
> 13461 open("tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No
> such file or directory)
> 13461 open("tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/etc/ld.so.cache", O_RDONLY) = 3
> 13461 fstat64(0x3, 0xffffbc34) = 0
> 13461 mmap2(NULL, 103504, PROT_READ, MAP_PRIVATE, 3, 0) = 0x5556c000
> 13461 close(3) = 0
> 13461 open("/lib32/libpthread.so.0", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300B\0"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbca8) = 0
> 13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x55586000
> 13461 mmap2(NULL, 332928, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55587000
> 13461 mmap2(0x55595000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd) = 0x55595000
> 13461 mmap2(0x55597000, 267392, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55597000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("i686/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("sse2/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/lib32/libdl.so.2", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\v\0"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc8c) = 0
> 13461 mmap2(NULL, 12392, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x555d9000
> 13461 mmap2(0x555db000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x555db000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("i686/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("sse2/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/emul/linux/x86/usr/lib/libX11.so.6", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\24"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc70) = 0
> 13461 mmap2(NULL, 826584, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x555dd000
> 13461 mmap2(0x556a3000, 16384, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc5) = 0x556a3000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No
> such file or directory)
> 13461 open("tls/i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("i686/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("sse2/libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("libXext.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/emul/linux/x86/usr/lib/libXext.so.6", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\'\0\000"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc54) = 0
> 13461 mmap2(NULL, 55636, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x556a7000
> 13461 mmap2(0x556b4000, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc) = 0x556b4000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No
> such file or directory)
> 13461 open("tls/i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("i686/sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("i686/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("sse2/libstdc++.so.5", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("libstdc++.so.5", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\274\3"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc38) = 0
> 13461 getcwd("/opt/doom3", 128) = 11
> 13461 mmap2(NULL, 753344, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x556b5000
> 13461 mmap2(0x55753000, 86016, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9d) = 0x55753000
> 13461 mmap2(0x55768000, 20160, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55768000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/lib32/libm.so.6", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p3\0\000"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc1c) = 0
> 13461 mmap2(NULL, 139424, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5576d000
> 13461 mmap2(0x5578e000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20) = 0x5578e000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No
> such file or directory)
> 13461 open("tls/i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("i686/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("sse2/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("libgcc_s.so.1", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\25\0\000"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbc00) = 0
> 13461 mmap2(NULL, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x55790000
> 13461 getcwd("/opt/doom3", 128) = 11
> 13461 mmap2(NULL, 30464, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55791000
> 13461 mmap2(0x55798000, 4096, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0x55798000
> 13461 close(3) = 0
> 13461 open("tls/i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such
> file or directory)
> 13461 open("tls/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("tls/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("i686/sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
> or directory)
> 13461 open("i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("sse2/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("libc.so.6", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> 13461 open("/lib32/libc.so.6", O_RDONLY) = 3
> 13461 read(3,
> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pT\1\000"..., 512) = 512
> 13461 fstat64(0x3, 0xffffbbe4) = 0
> 13461 mmap2(NULL, 1150260, PROT_READ|PROT_EXEC,
> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x55799000
> 13461 mmap2(0x558ac000, 16384, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x112) = 0x558ac000
> 13461 mmap2(0x558b0000, 7476, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x558b0000
> 13461 close(3) = 0
> 13461 mprotect(0x558ac000, 4096, PROT_READ) = 0
> 13461 munmap(0x5556c000, 103504) = 0
> 13461 brk(0) = 0xa5a2000
> 13461 brk(0xa5c3000) = 0xa5c3000
> 13461 brk(0) = 0xa5c3000
> 13461 set_thread_area(0xffffc50c) = 0
> 13461 getpid() = 13461
> 13461 rt_sigaction(SIGRTMIN, {0x5558f290, [],
> SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
> 13461 rt_sigaction(SIGRT_1, {0x5558f3e0, [],
> SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
> 13461 rt_sigaction(SIGRT_2, {0x5558f5d0, [],
> SA_RESTORER|SA_RESTART|SA_NOMASK|0x1790308, (nil)}, NULL, 8) = 0
> 13461 rt_sigprocmask(SIG_BLOCK, [RTMIN], NULL, 8) = 0
> 13461 rt_sigprocmask(SIG_UNBLOCK, [RT_1], NULL, 8) = 0
>
>
> -------------------------
>
> _______________________________________________
> MLUG-list mailing list
> [email protected]
> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>
>
>
> --
> Keith Vassallo
> Registered GNU/Linux User #290991
> http://www.keithvassallo.net
>
>
> _______________________________________________
> MLUG-list mailing list
> [email protected]
> http://mailserv.megabyte.net/mailman/listinfo/mlug-list
>
