I tried switching to Direct-IP mode, and ALL mmcli-commands (including *mmcli -m 0 --set-allowed-modes='2G'*) work fine from mmcli itself (without using any AT-commands as such).
a) Is this expected behaviour? b) Now, since qmi-proxy is no more there, there are chances of interminglings due to working of ModemManager and mmcli together, right? On Mon, Oct 17, 2016 at 8:48 PM, Aleksander Morgado < aleksan...@aleksander.es> wrote: > On Mon, Oct 17, 2016 at 5:10 PM, Ajay Garg <ajaygargn...@gmail.com> wrote: > > :O :O :O :O > > > > Of course I switched it to QMI. > > The previous unit that I did all the tests on, ran perfect when switched > to > > QMI mode. > > > > Your reply suggests that some functionalities (like switching to > > 2G-only-mode) would not work in Direct-IP mode. > > If so, Direct-IP would not serve our purpose. > > > > No, I didn't say that. Switching to 2G mode should be ok in Direct IP > mode, using AT commands. > > > I am in the process of retrieving the "ati" output of the earlier-modem > (on > > which things worked perfect in QMI-mode). > > That could probably help in determining if some firmware-mismatch is > causing > > any issue. > > > > > > But Aleksander, this is really bad news. > > Any idea what might have made things working in the earlier-modem in QMI? > > I have no idea; was it a MC8090 as well? > > -- > Aleksander > https://aleksander.es > -- Regards, Ajay
_______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel