I don't really know why it would work... but I've just tried negating SNMP access list and it doesn't work.
thanks Robert On 8/26/09, Mersberger, Robert <[email protected]> wrote: > Have you tried removing the snmp access list? > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Nicolás Quesada > Sent: Wednesday, August 26, 2009 2:19 PM > Cc: [email protected] > Subject: Re: [mrtg] riverstone > > Hello everyone, > > first, thanks a lot your help. It still doesn't work... so i'm going to > write down all I realize about my problem right now: > > 1. MRTG works perfectly with my Cisco routers: GetIf and MRTG work both OK: > I obtain SNMP response with MRTG, GetIf and SNMPWALK.exe on windows. > > 2. Riverstone doesn't work with GetIf and MRTG either. > > 2.1. I cannot generate the .mrtg file with CFGMAKER. > 2.2. I don't obtain SNMP response from the RStone with GetIf. > 2.3. I do'nt obtain SNMP response from SNMPWALK.exe that I execute by > windows. > > I acced to my RStone by an internal provider network, so any Firewall is > filtering me. Moreover, I can access by SNMP to the Cisco routers by the > same network. > > So, probably my problem is located in RStone configuration?? > > That's my RStone configuration: > > acl SNMP permit ip myIP/32 any > acl SNMP apply service snmp logging deny-only > > snmp set community public privilege read > snmp set community private privilege read-write > snmp set trap-source IP > snmp set source-ip WAN.IP > > snmp set mib name ctron-ssr-config-mib status enable > snmp set target targetIP community public status enable > snmp enable trap authentication > > I can see the ACL SNMP counter growing: > > ACL "SNMP": > Forward Count Source IP/Mask > Permit 18 myIP/32 > > And I can see the SNMP 5 last access: > > SNMP Last 5 Clients: > OtherDepartmentIP 2009-08-26 20:53:16 > myIP 2009-08-26 20:53:28 > myIP 2009-08-26 20:53:28 > myIP 2009-08-26 20:53:29 > OtherDepartmentIP 2009-08-26 20:53:16 > > The OtherDepartmentIP is a machine that is receiving correctly (theorically, > the responsable is on holidays) SNMP responses. > > So...... that's my case.... and the case is that I don't know what to do > now... Am I forgotting anything?? > > Thanks a lot, another time!! > > Nico > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg > > Please consider the environment before printing this e-mail. > > CONFIDENTIAL NOTICE: > This e-mail message and any attachment(s) (collectively, > this 'Email') are intended only for the confidential use of > the recipient(s) named above. If the reader of this message > is not the intended recipient named obove or an agent > responsible for delivering it to the intended recipient > named above, you have received this Email in error. > Please notify the sender immediately and permanently delete > this Email and any copies thereof. > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
