] This is the problem... Disks... I have 1Gb of HD and have to
] take disks! (-:
MegaSCSI has a very good virtual floppy mode. Just copy the disks as
diskimages to harddisk and run them with the virtual floppy emulation. Works
with almost every game!
And if you haven't got the time to convert disks into diskimages, you can
always buy a CD with diskimages and copy those to your harddisk with a SCSI
cdrom drive that you hook-up to your MegaSCSI.
]
] >Hey, did you know this (don't know if it works with MegaSCSI though):
] >At MSX startup:
] > keep SELECT pressed until beep: ignore HD interface.
] > keep CODE pressed until beep: ignore harddisk.
] >Works with my BERT interface...
]
] I'll try, but I don't think it will work. There is ways to disable things
] on MegaSCSI, but HD is not one of them. But I'll try.
You can disable entire MegaSCSI with some keyconbination at boot time (I
think graph+del). Or you can logically disconnect individual harddisks with
the setup program. Though, you have to reboot to free-up the drive letter.
Kind regards,
Alex Wulms
--
Alex Wulms/XelaSoft - MSX of anders NIX - Linux 4 ever
See my homepage for info on the *** XSA *** format
http://www.inter.nl.net/users/A.P.Wulms
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
