> This should not happen at all....
> Are you sure hardware handshake is implemented in your null-modem cable,
and
> that the software on the PC uses it?
> Otherwise, it might happen that buffers overflow when using
Y-modem-G-batch.
> With normal Y-modem-batch there should be no problem.
>
> If there still is a problem, another terminal program on the PC could
help,
> or maybe
> there is a problem in the RS232C interface design. (my fault I guess)
Well it works fine with my 33k6 modem... But that's not the same as a
null-modem cable ofcourse.
> If I have time and feel happy to do it, I might write some kind of
> file-commander over
> a serial link sometime. But since I do not have much time, it could be
this
> project
> will never start at all...
Ey come on Erik!
Go for it!
~Grauw
--
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
email me: [EMAIL PROTECTED] or ICQ: 10196372
visit the Datax homepage at http://datax.cjb.net/
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
