Van: Erik Maas <[EMAIL PROTECTED]>
Aan: <[EMAIL PROTECTED]>
Verzonden: vrijdag 4 februari 2000 0:03
Onderwerp: Re: Harddisk and CDrom drive under MSXDOS2
Hi Erik,
> >BTW this serial link is very slow.
> Are you sure hardware handshake is implemented in your null-modem cable,
and
> that the software on the PC uses it?
I'll check it this evening...
> Otherwise, it might happen that buffers overflow when using
Y-modem-G-batch.
> With normal Y-modem-batch there should be no problem.
Well, there are problems with all Xmodem and Ymodem protocols AND with the
external Zmodem receive protocol. The error message Telix (on the PC) gives
when the baudrate exceeds 9600 bps is: connection lost.
> If I have time and feel happy to do it, I might write some kind of
> file-commander over
> a serial link sometime.
That would be great!
BTW, I was wondering if the RS232C interface also has the standard MSX BIOS
extensions on board??? I'd like to write some compatible interface routines
for Hitech C...
Bye,
Pierre
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
