Am Die, den 14.10.2003 schrieb Jay R. Gindin um 19:51: > (opie_sync.c[115] - 2003/10/14 17:47.38) sync_connect > (opie_sync.c[126] - 2003/10/14 17:47.38) qcop_connect > (opie_sync.c[151] - 2003/10/14 17:49.38) QCop connection failed
> Now, if I turn off qcop: > (opie_sync.c[115] - 2003/10/14 17:50.54) sync_connect > (opie_sync.c[126] - 2003/10/14 17:50.54) qcop_connect > (opie_comms.c[213] - 2003/10/14 17:50.54) Attempting scp Connection. > (opie_comms.c[490] - 2003/10/14 17:50.55) SFTP failed > This makes it look like it's attempting to do something with qcop, even > when turned off??? Sorry, that's my bad. The debug statement for QCop is rather stupidly placed outside the block that only gets executed when QCop is active. It is as I suspected - sftp fails or appears to fail from multisync's point of view for reasons that are not all obvious -- after all you did it successfully on the command line. :-/ However, from the log entries it is obvious that ftp is not actually being used (instead it is still sftp), the log messages are different for FTP (just double-checked against the source). Tom, any ideas from you? I appear to be fresh out :-/ Regards, Eike -- Eike M. Lang <[EMAIL PROTECTED]> ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ Multisync-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/multisync-users
