� does the Eurorack standard specification equate audio and control voltages much the same as the old patchboard Moogs? issues are: 1. connectors (does CV use the same 1/8" phone jacks and plugs?, if no, what connectors are for CV?) 2. if yes (CV and audio use the same connectors and cables), must CV be full audio bandwidth?� (can one get away with sampling CV at a slower sample-rate if one were to do a digital module?) i can read about some of the CV standards (like pitch CV appears to be 1 volt-per-octave from -3 to +8 volts for the MIDI range, LFO is ca. +/- 2.5 volts, ADSR is 0 to +8 volts) but i don't see a reference to the type of connector.� perhaps, with silence in this spec, it's the same as audio and CV is meant to be interchangeable with audio. sorry, dumb question from someone who owns no Eurorack. -- r b-j � � � � � � � � �r...@audioimagination.com "Imagination is more important than knowledge."
_______________________________________________ dupswapdrop: music-dsp mailing list music-dsp@music.columbia.edu https://lists.columbia.edu/mailman/listinfo/music-dsp