Here is the new output of the log info...
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (d) loading ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC15 based chip ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a51450, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: i2c attach [client=saa7115[50],ok] msp34xx: ivtv version ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 2 tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3298, itv = 0xe0c974a0 ivtv: ivtv_enc_vbi_thread: pid = 3299, itv = 0xe0c974a0 ivtv: Initialized WinTV PVR 250, card #0 ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: i2c attach [client=saa7115[50],ok] msp34xx: ivtv version ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00891493, Revision 0x00000001 ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 1 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 33 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 225 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 25 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 65 ivtv: Create encoder radio stream ivtv: Setting Tuner 2 tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3367, itv = 0xe0cbaa94 ivtv: ivtv_enc_vbi_thread: pid = 3368, itv = 0xe0cbaa94 ivtv: Initialized WinTV PVR 250, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: Radio detected cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe on adapter ivtv i2c driver #1 (0x10005) cx25840: starting probe on adapter ivtv i2c driver #2 (0x10005) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 2 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 34 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 226 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 26 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 66 ivtv: Create encoder radio stream ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3466, itv = 0xe0cde088 ivtv: ivtv_enc_vbi_thread: pid = 3467, itv = 0xe0cde088 ivtv: Initialized WinTV PVR 150, card #2 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #3 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #3 (0x10005) cx25840: starting probe on adapter ivtv i2c driver #3 (0x10005) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 3 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 35 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 227 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 27 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 67 ivtv: Create encoder radio stream ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #3 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3539, itv = 0xe0d0167c ivtv: ivtv_enc_vbi_thread: pid = 3540, itv = 0xe0d0167c ivtv: Initialized WinTV PVR 150, card #3 ivtv: ==================== END INIT IVTV ==================== > > your RPM info shows that you've installed the development drivers, but > the logs show version 0.2.0 (rc3j) is loading. that could pose a > problem. _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
