On 10/19/05, Roger McClurg <[EMAIL PROTECTED]> wrote: > I am installing Mythtv on Gentoo Linux. I am using a VIA EPIA M10000 > with a PVR-350 for hardware. I can't seem to get lirc working right. > I've followed evry howto I can find for Mythtv and this > hardware/software, searched the archives, and monitored this list, but I > can't find an answer. > > I've loaded the modules and got lircd.conf setup correctly (I think), > but I don't get a character device /dev/lirc0, instead I get a > /dev/lirc/0. Irrecord works OK, but irw errors out with "Connection > refused". I tried giving it /dev/lirc/0 as a socket with the same > results. I tried a symlink /dev/lirc0-> /dev/lirc/0 with the same results. > > I sure would appreciate any help. > > Here is some info that might help: > ------------------------------------------------------------------------------------------- > pvr ~ # cat /etc/modules.d/ivtv > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-61 lirc_i2c > add above ivtv lirc_dev lirc_i2c > ---------------------------------------------------------------------------------------------------- > pvr ~ # lsmod > Module Size Used by > tda9887 12728 0 > msp3400 25672 0 > saa7127 12348 0 > saa7115 14296 0 > tuner 26760 0 > ivtv 217236 1 > snd_pcm_oss 48128 0 > snd_mixer_oss 17152 1 snd_pcm_oss > snd_seq_oss 32384 0 > snd_seq_midi_event 6272 1 snd_seq_oss > snd_seq 49744 4 snd_seq_oss,snd_seq_midi_event > at76c503_rfmd 4972 0 > at76c503 102144 1 at76c503_rfmd > at76_usbdfu 6052 1 at76c503 > bttv 148880 0 > video_buf 17636 1 bttv > i2c_algo_bit 8808 2 ivtv,bttv > btcx_risc 3912 1 bttv > tveeprom 11640 1 bttv > lirc_i2c 6756 0 > i2c_core 17840 9 > tda9887,msp3400,saa7127,saa7115,tuner,bttv,i2c_algo_bit,tveeprom,lirc_i2c > lirc_dev 11500 1 lirc_i2c > irda 113496 0 > snd_via82xx 22720 0 > snd_ac97_codec 79768 1 snd_via82xx > snd_pcm 83144 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec > snd_timer 21220 2 snd_seq,snd_pcm > snd_page_alloc 7620 2 snd_via82xx,snd_pcm > snd_mpu401_uart 6176 1 snd_via82xx > snd_rawmidi 20384 1 snd_mpu401_uart > snd_seq_device 6860 3 snd_seq_oss,snd_seq,snd_rawmidi > snd 46916 11 > snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > soundcore 7552 1 snd > usb_storage 47780 0 > ehci_hcd 43304 0 > uhci_hcd 30732 0 > ohci_hcd 33668 0 > ----------------------------------------------------------------------- > pvr ~ # ll /dev/lirc* > lr-xr-xr-x 1 root root 11 Oct 19 17:51 /dev/lirc0 -> /dev/lirc/0 > srw-rw-rw- 1 root root 0 Oct 19 13:43 /dev/lircd > > /dev/lirc: > total 0 > drwxr-xr-x 1 root root 0 Dec 31 1969 . > drwxr-xr-x 1 root root 0 Dec 31 1969 .. > crw------- 1 root root 61, 0 Dec 31 1969 0 > ------------------------------------------------------------------------ > pvr ~ # cat /etc/lircd.conf > # brand: Hauppauge > # model no. of remote control: Grey (PVR-350) > > begin remote > > name hauppaugegrey > bits 13 > eps 30 > aeps 100 > > one 0 0 > zero 0 0 > gap 200000 > min_repeat 4 > toggle_bit 2 > > > begin codes > OFF 0x00000000000017FD > GO 0x0000000000001FFB > 1 0x00000000000017C1 > 2 0x00000000000017C2 > 3 0x00000000000017C3 > 4 0x00000000000017C4 > 5 0x0000000000001FC5 > 6 0x0000000000001FC6 > 7 0x0000000000001FC7 > 8 0x0000000000001FC8 > 9 0x0000000000001FC9 > 0 0x00000000000017C0 > BACK/EXIT 0x00000000000017DF > MENU 0x0000000000001FCD > CH+ 0x00000000000017E0 > OK 0x00000000000017E5 > CH- 0x00000000000017E1 > VOL- 0x0000000000001FD1 > VOL+ 0x00000000000017D0 > RED 0x0000000000001FCB > GREEN 0x0000000000001FEE > YELLOW 0x00000000000017F8 > BLUE 0x0000000000001FE9 > MUTE 0x00000000000017CF > BLANK 0x0000000000001FCC > FULL 0x00000000000017FC > REW 0x0000000000001FF2 > PLAY 0x00000000000017F5 > FFW 0x0000000000001FF4 > RECORD 0x00000000000017F7 > STOP 0x0000000000001FF6 > PAUSE 0x00000000000017F0 > REPLAY 0x0000000000001FE4 > SKIP 0x00000000000017DE > end codes > > end remote > > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
What is in the /etc/conf.d/lircd file? Do you have LIRCD_OPTS="-d /dev/lirc/0" in it? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
