On 03/11/05, Mercury Morris <[EMAIL PROTECTED]> wrote: > Here's my (failed) attempt to setup multiple ATI Remote Wonders > on multiple systems: > > 1. Added this line to /etc/modprobe.conf > > options lirc_atiusb unique=1 debug=1 mask=0x0002 > > 2. Pressed and held the "hand" key until the LED began to blink, > Pressed the 2 key, then Pressed the "hand" key again > > 3. Re-booted the system > > Here's what didn't work: > > 1. Entries in /var/log/messages showed "data received" messages, > but the MythTV screens didn't change as keys were pressed > > 2. No debug messages printed by the "dprintk" subroutine > in lirc_atiusb.c were ever displayed - making debugging difficult! > > I went through the documentation in the lirc-0.7.2 package, > reading "lircd.conf.atiusb", and read the output from the command, > "modinfo lirc_atiusb". I don't see where I went wrong, or left anything > out. > > It's gotten too late today to continue debugging this. That is, recordings > are scheduled in the next two hours. Restoring the previous > /etc/modprobe.conf > restored the machine to normal operation after another reboot. > I'll continue tomorrow and into the weekend.
Tried seeing what irw reports as you press keys on the remote? -- Robert "Anaerin" Johnston _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
