Very nice Josh! John
From: [email protected] [mailto:[email protected]] On Behalf Of Crusty OMO Sent: Tuesday, May 13, 2014 1:19 PM To: [email protected] Subject: RE: [N8VEM-S100:3664] ALTAIR/IMSAI 8080 CPU replacement board Hi Group, Well, I'm cooking up this board at the moment. I have all the hardware figured out to run like the original CPU boards. I need to do a little more testing of the hardware, then I'll proceed to building the boards. The Memory, I/O, UARTs and SPI interface to the SD card appear to all be working. 8K chunks of memory can become either ROM, RAM or mapped off the board. CPU: 8080A UARTS: 2x 8250 RAM: 2x 32K ROM: 32K I/O: 8 input, 6 output pins SPI to SD Card interface ALTAIR & IMSAI Front Panel Connectors. Where ROM is selected in a block it overlaps the RAM on reads, but writes go through to RAM. The ROM can then be disabled and reads will come from the RAM at that location. The firmware is copying itself to RAM then switching off the ROM. The CPU can be deselected with jumpers and the board will work as RAM/ROM and I/O for another CPU on the bus. Pictures attached. Yellow-Data, Brown-Address, Blue-I/O, Green-Control/Status & everything else. Regards, Josh Bensadon -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
