Hi Dave, I think I now have the dual IDE drive support updated. I have it in two places ate the bottom of each page:-
http://s100computers.com/Software%20Folder/CPM3%20BIOS%20Installation/CPM3%20HDISK%20BIOS%20Software.htm and here:- http://s100computers.com/My%20System%20Pages/IDE%20Board/My%20IDE%20Card.htm If you notice any other errors please let me know Thanks John From: [email protected] [mailto:[email protected]] On Behalf Of yoda Sent: Wednesday, June 18, 2014 6:52 PM To: [email protected] Cc: [email protected] Subject: Re: [N8VEM-S100:4276] Re: A windows based program to write a CPM3 image to a CF card for the S100 IDE board Hi John Status update and a couple of questions. I have both banked and non banked working with s100 serial I/O card and IDE. I will finish my prop console this weekend so I can test that version. I noticed that none of the source files you have support both ports of the IDE. I think that would be useful to people so I will look at adding the second drive - does not look too hard to do. I am a little reluctant to build images that support floppy as there probably not as many people that have the ZFDC board running (I don't) and it will hang if it doesn't find one. I will have writeup on how to extend making other types of images. Basically if you drop in a cpmldr.com and a CPM3.sys into the directory and run a bat file it will make an image for you. So for the adventurous that should be a reasonable solution. Any comments? Dave -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
