Dave I have not had a problem with that board with the Propeller Console IO board at all. Have not run it with the IDE board. That said I could only get about 6MHz out of a 10Hz chip. I know Todd is about to order another batch, we should resolve this ASAP I'm MIA for two weeks unfortunately John
John Monahan ([email protected]) On Jun 28, 2014 3:32 PM, "yoda" <[email protected]> wrote: > Hi > > Wondering if people have been using the 68K board. I think I have timing > issue because pWR* is going HI at the same time the data is being released. > You can see this in attached LA capture. I think that is why I am not > getting characters from the prop console and probably explains why I have > not gotten reliable data from the IDE card either. The dual serial card > and memory work just fine. I have tried different clocks as well - this > one is at 2MHz so that should not be the issue. Was wondering if someone > had seen this and resolved. I will dig through the schematics and the > Wilcox book as well. I think once I have this resolved, I can get CP/M 68K > going. > > Thanks in advance > > Dave > > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
