I have now uploaded my updated documentation aimed at new S100 users discussing 'Disk Layout Considerations for CP/M 3.0 System Build' for the s100computers.com IDE interface board (better late than never :-) ) If there are any errors or omissions in the document please let me know and I will endeavour to make corrections. The document is called Z80 CP_M 3.0 build_Rev01.doc and can be found in my wiki folder linked below http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=David%20Fry I have also updated the document Z80_LBA_Addressing_Rev01.doc which lists the code changes by source file, and I have also cleaned up the ZIP archive CPM3_LBA.zip removing all old boot disk images in order to direct the source of disk images to one location. For all CP/M disk images please now refer to the recent work done by Dave (yoda) at the following link http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images regards David Fry
On Sunday, June 22, 2014 8:42:01 PM UTC+1, yoda wrote: > I have uploaded the basic images and a short document on how to put these > on a CF card with all the necessary tools included. The link is > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images > > I have also included modified cpmtools that understand the disk format so > you can manipulate the images before writing them to a CF card. I would > like to use this thread for questions and suggestions for the > documentation. I have not verified the prop images as I did not have any > 74LS374's on hand so I could not finish bringing up my prop console board - > should be able to do that by the coming weekend. I assume a lot of you can > verify whether they work or not. I believe they should. I have verified > the serial ones do work. > > I am opening another thread for suggestions for going forward. I want to > cover how to build and customize the actual cpmldr and cpm3.sys files. I > will leverage a lot of what John has done and David Fry will contribute his > work on the LBA addressing changes that made this all work. > > Let me know how it goes. > > Dave > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
