Hi Leonard, I'm not sure if Dave (yoda) has his propeller console card working yet so I don't know if the prop console versions have been tested. I will try to find the time tonight to test them on my system. will get back to you regards David Fry On Tuesday, July 8, 2014 6:08:39 PM UTC+1, mathman wrote:
> Having trouble getting my system to boot CPM from the CF card. > > I have just the following loaded in my backplane: > > 4Meg mem. board with 1 pair of chips > > Prop I/O card > > The Z80 CPU > > and the IDE card. > > I am using the card options shown on John's S100 page. > > John M.'s CPU monitor seems to run fine. When I load a CF card (tried with > different cards, same result) and boot > > with the monitor "P" command, I get: > > > > CP?M V3.0 Loader > > Copyright (C) 1980, Digital Research > > > > BDOS ERR: Perm. > > > > And that's it. There is a "40" display on the IDE card, which I take to > mean Sector 40 was being read? > > I've not had time to read/in detail all the posts, due to personal > circumstances; so I may have missed something. > > I have seen mention about options on some of the cards- is there a > compendium of all these somewhere for the CPM load? > > Trying to find the time to troubleshoot this properly- > > Suggestions/ guidance appreciated > > thank you > > > > Leonard > > > > *From:* [email protected] <javascript:> [mailto: > [email protected] <javascript:>] *On Behalf Of *nbreeden > *Sent:* Tuesday, July 01, 2014 5:24 PM > *To:* [email protected] <javascript:> > *Subject:* [N8VEM-S100:4453] Re: CPM3 Disk Image - quick start and Images > posted > > ' > > > > On Sunday, June 22, 2014 12:42:01 PM UTC-7, yoda wrote: > > I have uploaded the basic images and a short document on how to put these > on a CF card with all the necessary tools included. The link is > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images > > > > I have also included modified cpmtools that understand the disk format so > you can manipulate the images before writing them to a CF card. I would > like to use this thread for questions and suggestions for the > documentation. I have not verified the prop images as I did not have any > 74LS374's on hand so I could not finish bringing up my prop console board - > should be able to do that by the coming weekend. I assume a lot of you can > verify whether they work or not. I believe they should. I have verified > the serial ones do work. > > > > I am opening another thread for suggestions for going forward. I want to > cover how to build and customize the actual cpmldr and cpm3.sys files. I > will leverage a lot of what John has done and David Fry will contribute his > work on the LBA addressing changes that made this all work. > > > > Let me know how it goes. > > > > Dave > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
