Hi Leonard, I have just checked both propeller images (banks and non-banked) and they both boot fine on my system. I'm not sure how you are loading the image onto the card but grab yourself a copy of HxD and open the card to see if everything looks laid out correctly http://mh-nexus.de/en/hxd/ refer to the docs I uploaded yesterday if you need to. If the layout looks fine then the problem lies elsewhere regards David Fry
On Tuesday, July 8, 2014 6:57:44 PM UTC+1, David Fry wrote: > Hi Leonard, > > I'm not sure if Dave (yoda) has his propeller console card working yet so > I don't know if the prop console versions have been tested. > I will try to find the time tonight to test them on my system. > will get back to you > > regards > > David Fry > On Tuesday, July 8, 2014 6:08:39 PM UTC+1, mathman wrote: > >> Having trouble getting my system to boot CPM from the CF card. >> >> I have just the following loaded in my backplane: >> >> 4Meg mem. board with 1 pair of chips >> >> Prop I/O card >> >> The Z80 CPU >> >> and the IDE card. >> >> I am using the card options shown on John's S100 page. >> >> John M.'s CPU monitor seems to run fine. When I load a CF card (tried >> with different cards, same result) and boot >> >> with the monitor "P" command, I get: >> >> >> >> CP?M V3.0 Loader >> >> Copyright (C) 1980, Digital Research >> >> >> >> BDOS ERR: Perm. >> >> >> >> And that's it. There is a "40" display on the IDE card, which I take to >> mean Sector 40 was being read? >> >> I've not had time to read/in detail all the posts, due to personal >> circumstances; so I may have missed something. >> >> I have seen mention about options on some of the cards- is there a >> compendium of all these somewhere for the CPM load? >> >> Trying to find the time to troubleshoot this properly- >> >> Suggestions/ guidance appreciated >> >> thank you >> >> >> >> Leonard >> >> >> >> *From:* [email protected] [mailto:[email protected]] *On >> Behalf Of *nbreeden >> *Sent:* Tuesday, July 01, 2014 5:24 PM >> *To:* [email protected] >> *Subject:* [N8VEM-S100:4453] Re: CPM3 Disk Image - quick start and >> Images posted >> >> ' >> >> >> >> On Sunday, June 22, 2014 12:42:01 PM UTC-7, yoda wrote: >> >> I have uploaded the basic images and a short document on how to put these >> on a CF card with all the necessary tools included. The link is >> http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=CPM3-Disk-Images >> >> >> >> I have also included modified cpmtools that understand the disk format so >> you can manipulate the images before writing them to a CF card. I would >> like to use this thread for questions and suggestions for the >> documentation. I have not verified the prop images as I did not have any >> 74LS374's on hand so I could not finish bringing up my prop console board - >> should be able to do that by the coming weekend. I assume a lot of you can >> verify whether they work or not. I believe they should. I have verified >> the serial ones do work. >> >> >> >> I am opening another thread for suggestions for going forward. I want to >> cover how to build and customize the actual cpmldr and cpm3.sys files. I >> will leverage a lot of what John has done and David Fry will contribute his >> work on the LBA addressing changes that made this all work. >> >> >> >> Let me know how it goes. >> >> >> >> Dave >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
