Hi Josh, Do I need to update to the new firmware if I don't have the propeller board? I still have a ways to go before I get my propeller board assembled. Right now I have finished the 8 slot motherboard and next I will build the FP mini.
Thanks, Harold On Sunday, December 14, 2014 10:30:57 AM UTC-5, monahanz wrote: > Hi Peter, welcome to the group. > > We are a hobby based group of people (spread actually around the world > these days), that collect and build S100 boards (and some other board > configurations as well). There is no central organization or person “in > charge”. I and a few others design and produce new S100 boards (at our own > expense) and when done, typically do a “group purchase” of a new board. > These are bare boards which must then be stocked with chips etc. Typically > I provide basic build/testing instructions and if needed, basic > software. > > > > This process has now being going on for a few years with the number of > boards well into the 100’s. The major ones are listed here:- > > http://s100computers.com/My%20System%20Index%20Page.htm > > > > In many cases updated versions of the boards were/are being made. > Unfortunately it is difficult for new people like you to get started since > many by now already have the basic starting boards. > > > > However from time to time a new “run” of an old board is done. It needs > somebody to organize and arrange a run. This is more trouble than you > might think. The boards are usually made by a (Chinese) group call PCBCart > for us. The required Gerber files are available at the bottom of each > board’s description on the S100Computers web page or here:- > > http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=S-100%20Boards > > > > To get you started it is probably best you follow this forum > > https://groups.google.com/forum/?fromgroups#!forum/n8vem-s100 > > From time to time a board run is proposed by a member. Later when you are > more experienced, you could start one yourself. > > > > Hope the above helps. > > John Monahan > > > > *From:* [email protected] <javascript:> [mailto: > [email protected] <javascript:>] > *Sent:* Sunday, December 14, 2014 3:59 AM > *To:* [email protected] <javascript:> > *Subject:* [N8VEM-S100:5831] Fw: N8VEM > > > > > > ----- Forwarded Message ----- > *From:* admin <[email protected] <javascript:>> > *To:* [email protected] <javascript:> > *Sent:* Sunday, December 14, 2014 3:34 AM > *Subject:* N8VEM > > > Hi, Andrew! I am interested in almost all of your S100 boards. What is the > current status for completed boards? > > Peter Cole, Altona, Manitoba, Canada > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
