Hello, here the connections (I have got it from Mike and removed one error...):
Bottom Connector (left-to-right, viewed from rear): 1 - Filaments, 6.3V 2 - Filaments, 6.3V 3 - B+ Supply, 300V 4 - BD Tube Clear (0.001uf cap coupling to BD-301 cathode) 5 - Input (50-60V negative pulse, rising edge <1usec) 6 - Cascade Output 7 - N/C 8 - Ground 9 - N/C 10 - BD Tube Reset (24pf cap coupling to BD-301 spade 9) Top Connector (left-to-right, viewed from rear): 1 - Spade/Nixie Cathode 0 2 - Spade/Nixie Cathode 9 3 - Spade/Nixie Cathode 8 4 - Spade/Nixie Cathode 7 5 - Spade/Nixie Cathode 6 6 - Spade/Nixie Cathode 5 7 - Spade/Nixie Cathode 4 8 - Spade/Nixie Cathode 3 9 - Space/Nixie Cathode 2 10 - Spade/Nixie Cathode 1 I have not tested the reset yet, the tube simply starts counting in a random position. Regards, René. On 9 Okt., 14:35, Dekatron42 <[email protected]> wrote: > Hi, > > Could you please post the schematic for yoru connections. If you have > succesfully been able to drive the reset wiring giving correct resets > I'd be interrested in that too. > > Regards -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
