Well the PV Electronics R568 Clock kit was ordered today. Pete is a great guy to work with.
Jeff is getting my NWTS. Dalibor has my order for 6 Black R|Z568M Nixie Tubes. I also have been working on the stand design. I have most of the hole spacing documented in a Excel file and have the dimensions for the arc's I need to cut out of the aluminum. The plan right now is to see if I can find someone to convert the measurements of the Excel file to a DWG. or DXF. file. Then I probably will get the stock cut out on a CNC router with all the thru holes done. At the same time they can cut out a pattern in MDF as a tray to let me finish the holes with a unibit. and to finish the part. The holes to fasten it together will also be done at the same time. That way all I need to do is tap the holes and everything should fit perfectly with no gaps. There still will be a lot of work to do but this will insure that the pieces fit correctly. The case will be made from acrylic as I need to fabricate the prism ends. Chomping on the bit for now until the kit is delivered. Edward Robert L Thanks for posting that mod. When I get to that point we can get together. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/1b3c3f9a-a7ee-443f-b911-c5f1f4b31015%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
