The brushed aluminum (or stainless) effect can be achieved in a number of ways -- I suggest you get samples of the material and try a few. A wire brush is the obvious first choice. Try both steel and brass brushes. Also try steel wool, 3M pads, and wet sanding with very fine paper. Each makes a different effect. In all cases go lightly at first and in one direction only.
If you can, you may like the more uniform effect created by brushing the material before it is cut. Terry > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/417db92c-f9b2-4d65-a640-668b3ed2f981%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
