For the circuit shown and simulated above... there's output rise time and output delay from application of power. These are two different times.
In the simulation below, + 5 input power comes on at T=0 and it then takes about a half second for the slow start output to reach ~5 V. The slow start voltage rises from 0 to ~5V in about 240 mS... This is the ramp the load sees. There's a gap after the application of power before the output begins to rise. B -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/2a01ff7e-030d-4b4c-9556-a1cda4e9d02c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.