I had forgot your design. Excellent project page and thanks for reminding me of it!
On Wednesday, July 17, 2019 at 4:23:50 AM UTC-3, Nick wrote: > > My MAX1771 design can probably be pushed to that. Yes, C4 & C6 would have > to be higher voltage and R2 changed - the PRC221 range have a working > voltage of 200V but are safe to 500V - it would be better to find a 2512 > footprint resistor with a 300 or 350 volt working for long term reliability. > > D1 would need to be changed from an ES2F to an ES2G (same footprint, 400V > Vrrm) but it may be better to find one with the same footprint (SMB) which > has a higher RMS working voltage. > > A lower ESR FET would also be a good plan - see the web page for details - > https://nick.desmith.net/Electronics/NixiePSU.html > > Nick > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/32f597fd-e122-4066-822b-9f6e1a45f284%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
