Hey guys,
I took the power supply to the electrician, he changed two small caps, and
problem was solved!
Thanks a lot for your help, I really do appreciate it...:)
Tomer
----- Original Message -----
From: "Jim" <[email protected]>
To: <[email protected]>
Sent: Monday, January 05, 2009 7:48 PM
Subject: Re: NEOTEK: Elan m2 problem
Greetings all,
Well, if it's a kind of quick "bzzzzzt" noise, I've heard that one
before. Here is something to try after you check the p/s and connections.
Press down on the front of the console (just below the faders); start at
one end and work your way to the other. If you can make the bzzzzt occur,
you may be close to the area where there is a bad connection. It you can
narrow it down length wise, then attempt to press on that area, but
working your way up towards the meter bridge. The other method is to lay
on the ground under the console and use some type of insulated device to
push UP in different places. I've used this technique to find bad
connections before with some degree of success. Best of luck!
Regards, Jim
At 06:21 PM 1/4/2009, you wrote:
It's definately not a hum...
----- Original Message -----
From: <mailto:[email protected]>Donald Put
To: <mailto:[email protected]>[email protected]
Sent: Sunday, January 04, 2009 11:39 PM
Subject: Re: NEOTEK: Elan m2 problem
On Sun, Jan 4, 2009 at 1:04 PM, Ike Zimbel
<<mailto:[email protected]>[email protected]> wrote:
Let's be clear about terminology here. I am often trying to determine
whether or not someone heard a "buzz" or a "hum". I define buzz as more of
an HF noise, of no particular frequency. Hum is, in my book, AC line
frequency (50/60hz depending what part of the world you are plugged in)
and its harmonics: 100/120hz, 150/180hz, 200/240hz, 250/300hz etc.
The two sounds tell a very different story as do the different frequencies
of hum.
best,
ike
I use the same parameters to distinguish between the two, but I should
have clarified with the OP because, as you said, "buzz" and "hum" usually
point to different causes.
Cheers,
--
Don
------
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email to
[email protected].
The Neotek list is lovingly hosted by Catapult Web Development. Remember
that any message or reply sent to the list will be automatically forwarded
to all subscribers.
Vive Le Neotek !
Thanks.
------
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to [email protected].
The Neotek list is lovingly hosted by Catapult Web Development. Remember that
any message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek !
Thanks.
