is there a way i can send a tone into my series II without having to go through a channel strip with panpot which would allow me to measure the output of the 2mix more accurately?........or can i do this.......send a tone into the channel strip, crank the panpot all the way to the left, adjust level to read zero, measure the output, and adjust level to read 1.25 V (0VU) then readjust meter with trimpot on the back of the meter......do the same for the right side........make sense?......
From: [email protected] To: [email protected] Subject: RE: NEOTEK: series II meter adjustment Date: Sun, 11 Oct 2009 17:16:58 +0000 it is not the 2 mix trim pots.......how do you make sure a channel is not feeding the 2mix?.......how would you send a tone through the board to yr. tape machine if it was not feeding the 2mix?...... From: [email protected] Date: Sun, 11 Oct 2009 13:07:32 -0400 Subject: Re: NEOTEK: series II meter adjustment To: [email protected] On some of the consoles there is an adjustment for the 2 mix buss. They are 2 knobs right above the solo, mute in place, mono logic switches. Maybe this might be it. All so make sure that the channels are not feeding the 2 mix as a L/R pan would pose a difference. Good Luck, Clark New! Hotmail sign-in on the MSN homepage. _________________________________________________________________ New! Open Messenger faster on the MSN homepage http://go.microsoft.com/?linkid=9677405
