Re: NEOTEK: series II meter adjustment

[ClarkJHagan]

Without a 2 mix insert, it is really hard to do without using a channel but 
 your idea of panning to one side, adjust the gain the go to the other side 
and  see what the difference is, is a good way. Check that both of the 
outputs are  the same level, then look at the meters. Sometimes there is a fine 
adjust or  tweek pot on the meter card or the use a resistor for a "fixed" 
reading. Do this  if the outputs read the same from the console.
 
Good Luck,
Clark