Not better or worse sounding just more difficult to work on. Much more difficult.
Sent from my iPhone On Mar 18, 2011, at 10:56 PM, Jack Dean Stauss <[email protected]> wrote: While we are on the subject of the hardwired consoles...is the general consensus of the list that they are sonically superior or inferior to the modular? Just wondering what the thought process was when they hardwired the modules and made them so difficult to remove. Sent from my iPhone On Mar 18, 2011, at 8:33 PM, "Ron Runyon" <[email protected]> wrote: I have a IIIc and the Modules are Definitely Hard Wired. All of Them. Ron Runyon From: [email protected] [mailto:[email protected]] On Behalf Of Matt Walsh Sent: Friday, March 18, 2011 8:07 PM To: [email protected] Cc: [email protected] Subject: Re: NEOTEK: series III teardown/move questions... Clark-- Have you ever sat in front of an actual Neotek in your life? The majority do not have hardwired modules. A friendly reminder from reality, Matt W On Fri, Mar 18, 2011 at 1:16 PM, <[email protected]> wrote: First off, The modules are all hardwired. the cannot comeout with out a lot of work. You really can only sit it up with the meter bridge down, pad up, 2 - 4-wheel dollies, strap her down and go. That is the best way (this is how Neotek save money by not having removeable modules like a neve, the differece between a 30 G console and a 100 G console). Everything will need to be teseted again when set up as since it is hardwired, some solder points become loose. Not a big deal. I have moved a series 3, 3 different times to 3 different states. Good Luck Clark
