Hello,
I am trying desperately to get Net-SNMP running on an AIX server and am having
problems. I had asked for assistance and Robert stepped up to help but it
seems that he may not be available anymore. Is there someone else that might
be able to help?
Please read the two email directly below this one. In addition to the
information there, I have now tried the load on a second AIX server with the
exact same results. Any assistance would be greatly appreciated.
THANKS
Mike Lomax
Principal Systems Engineer,
Advanced Technology Solutions
Office (909) 379-0669
Cell (951) 206-5852
michael.lo...@quadramed.com
Visit QuadraMed's Booth (#1601) at AHIMA
October 2 - 5 in Salt Lake City, UT
-----Original Message-----
From: Lomax, Michael P.
Sent: Friday, August 12, 2011 8:37 AM
To: 'rst...@freesnmp.com'
Cc: 'net-snmp-coders@lists.sourceforge.net'
Subject: RE: NET-SNMP Compile Errors
Robert,
In the interest of time, since I need to get through this install process, I
decided to go ahead and run the `make install`. First I ran into a permission
problem with install-sh which was easily remedied and then I got the following
error:
"install: installed net-snmp-create-v3-user.1 in /usr/local/share/man/man1
/bin/sh: 0403-057 Syntax error at line 1 : `;' is not expected.
make: 1254-004 The error code from the last command is 2.
Stop.
make: 1254-004 The error code from the last command is 2.
Stop.
# "
Any further help you can provide would be greatly appreciated.
THANKS
Mike Lomax
Principal Systems Engineer,
Advanced Technology Solutions
Office (909) 379-0669
Cell (951) 206-5852
michael.lo...@quadramed.com
Visit QuadraMed's Booth (#1601) at AHIMA
October 2 - 5 in Salt Lake City, UT
-----Original Message-----
From: Lomax, Michael P.
Sent: Thursday, August 11, 2011 2:46 PM
To: 'rst...@freesnmp.com'
Cc: 'net-snmp-coders@lists.sourceforge.net'
Subject: RE: NET-SNMP Compile Errors
Will you be able to provide me with any more assistance?
THANKS
Mike Lomax
Principal Systems Engineer,
Advanced Technology Solutions
Office (909) 379-0669
Cell (951) 206-5852
michael.lo...@quadramed.com
Visit QuadraMed's Booth (#1601) at AHIMA
October 2 - 5 in Salt Lake City, UT
-----Original Message-----
From: Lomax, Michael P.
Sent: Wednesday, August 10, 2011 12:28 PM
To: 'rst...@freesnmp.com'
Cc: net-snmp-coders@lists.sourceforge.net
Subject: RE: NET-SNMP Compile Errors
Just as your latest email below arrived I had completed a `make test` against
5.7.1.pre1. Leading up to that point, I got the following during the run of
`configure`:
"checking whether the Perl function system() invokes a POSIX shell... syntax
error at -e line 1, at EOF
Execution of -e aborted due to compilation errors.
./configure[6481]: : cannot execute
./configure[6481]: "');': unknown test operator
yes"
" checking libperfstat.h usability... no
checking libperfstat.h presence... yes
configure: WARNING: libperfstat.h: present but cannot be compiled
configure: WARNING: libperfstat.h: check for missing prerequisite headers?
configure: WARNING: libperfstat.h: see the Autoconf documentation
configure: WARNING: libperfstat.h: section "Present But Cannot Be Compiled"
configure: WARNING: libperfstat.h: proceeding with the compiler's result
configure: WARNING: ##
----------------------------------------------------##
configure: WARNING: ## Report this to
net-snmp-coders@lists.sourceforge.net##
configure: WARNING: ##
----------------------------------------------------##"
But it did complete its run.
I then ran `make` and it seemed to complete with no errors.
I next ran `make test` and while at first I had issues with execute permissions
below the testing directory, once I changed everything below testing to 777 it
seemed to run better. However the end result was that only "20 / 66
succeeded." It then gave two "Stop" errors with error codes "46" and "2"
respectfully and exited back to an AIX prompt.
Seems that something is still not right. Could it have to do with either of
the items quoted above from the configure run?
THANKS
Mike Lomax
Principal Systems Engineer,
Advanced Technology Solutions
Office (909) 379-0669
Cell (951) 206-5852
michael.lo...@quadramed.com
Visit QuadraMed's Booth (#1601) at AHIMA
October 2 - 5 in Salt Lake City, UT
-----Original Message-----
From: Robert Story [mailto:]
Sent: Wednesday, August 10, 2011 12:14 PM
To: Lomax, Michael P.
Cc: net-snmp-coders@lists.sourceforge.net
Subject: Re: NET-SNMP Compile Errors
On Wed, 10 Aug 2011 10:23:00 -0400 Michael P. wrote:
LMP> "transports/snmpUDPBaseDomain.c: In function 'netsnmp_udpbase_sendto':
LMP>
LMP> transports/snmpUDPBaseDomain.c:345: error: 'MSG_DONTWAIT' undeclared
LMP> (first use in this function)
LMP>
LMP> transports/snmpUDPBaseDomain.c:345: error: (Each undeclared identifier
LMP> is report ed only once
LMP>
LMP> transports/snmpUDPBaseDomain.c:345: error: for each function it appears
This has been fixed in 5.7.1.pre1, along with a few other important fixes. I
suggest you try it instead of 5.7.
------------------------------------------------------------------------------
uberSVN's rich system and user administration capabilities and model
configuration take the hassle out of deploying and managing Subversion and
the tools developers use with it. Learn more about uberSVN and get a free
download at: http://p.sf.net/sfu/wandisco-dev2dev
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
