Nope... It failed with: "sh-2.05b# autoconf configure.ac:14: error: Autoconf version 2.63 or higher is required configure.ac:14: the top level autom4te: /usr/linux/bin/m4 failed with exit status: 63 sh-2.05b#"
Mike Lomax Principal Systems Engineer, Advanced Technology Solutions Office (909) 379-0669 Cell (951) 206-5852 [email protected] Visit QuadraMed's Booth (#1601) at AHIMA October 2 - 5 in Salt Lake City, UT -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Shield Sent: Tuesday, August 23, 2011 2:46 PM To: Lomax, Michael P. Cc: [email protected] Subject: Re: NET-SNMP Compile Errors On 23 August 2011 22:05, Lomax, Michael P. <[email protected]> wrote: > I therefore started studying further about Git and found Thomas' patch. > Using `patch -b -i <patchfile> configure.d/config_os_headers` it appeared I > was successful in updating configs_os_headers using the patch as the old > and new files differed by what was in the patch. OK - so it's perhaps worth trying to create the configure script and run with that. Try the following: $ autoconf $ ./configure If that seems to work correctly (and particularly if it picks up libperf OK), then try running the agent and see if it complains. > However it sounds like you are saying that I am still going down the wrong > path for "a". > The note with "a" says "instructions on how to do this are on the website" > however I have not been able to find them. See http://sourceforge.net/scm/?type=git&group_id=12694 or http://www.net-snmp.org/wiki/index.php/Git Dave ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
