> The hardware problems occurs on the old hypercom cards. Full details
> as to the problem are on there site. I woul'nt expect the newly
> manufactured cards to have any problems. Would you?
erm? I have an 'old' Hypercom 3Z in my machine, which works fine with the
new drivers. My Hypercom 3Z is one of the first cards produced, from 1997.
Not only this, but I've not had one single report of the 'old' Hypercom 3Z's
not working with the new drivers, except from yourself..
> All reports I make are clear, concise and phrased neutrally. I do not
ie. your 'Voyager is bugged' reply to someone who has problems with sites
stalling?
> OK I will take a step and accept your word for it that the a1200 card
> drivers maybe fine
The Hypercom 3Z/3+ drivers are fine, they work here and for others.
> Anyway all of the issues on my hardware and the 3Z have been between
> me and VMC. Also as I didn't buy the card from you Chris you have
> very little to do with it.
You are indicating the problems, as if they are a generic problem, on 'my'
list with my customers. This I don't like.
I don't mind you writing that *you* have a problem, but the way you wrote
your replies indicate that the drivers are buggy, full stop, no argument.
Worse, they are written as if this is going to occur for everyone else who
has that card and those drivers, which is simply untrue!
All this does is make people think 'hmm, if the drivers are so bugged, I
wonder if I'll have problems', which results in fewer sales, for no reason.
Everything is 'bugged' in some way or form, especially on different systems.
Software can perform in a stable manner on myriads of Amiga's, then on two
or three it might crash before it even starts. But I don't expect this
person to write 'this software is very buggy' and also imply that this
'bugginess' applies to everyone and every system..
Chris.
Active Technologies - Chris Wiles [Managing Director]
http://www.active-net.co.uk
Tel: +44 (0)1325 460116 [9-6 Mon-Fri, 10-5 Sat]
Fax: +44 (0)1325 460117
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
