Lamar,
On 22-Nov-99, you wrote:
> I have a SupraExpress 56e V.90 modem and NetConnect 2.3. I usually
> connect at 44,000 baud but I get random disconnects quite often. The
> cause almost always seems to be a "Retrain Failure".
>
> What is a good INIT string to use?
I have the same modem and I use the Generic Modem (As NC3
doesn't list this). I connect at 115200, with a noticable speedup
(Lucky?), sometimes 7-10,000 kps with V3.
Init String: AT&F&D2\r
Dial Prefix: ATDT
Dial Suffix: \r
Anwer: ATA\r
>
> What is the command to correct for this "Retrain Failure"?
Never seen this.
Later,
IKE
---------------------------------------
MAILTO:[EMAIL PROTECTED]
WWW: http://dmeese.tripod.com/
ICQ: 34622037
PGP Available Upon Request
---------------------------------------
A1200 Micronik ZII/ 030/ 50/ 3.5OS/ 32MB/ 2.1GB
CGFX4.2/ CV643D/ IOBlix/ NEC MultiSync/ 4XCD
Supra Express 56K
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
