At some time around Mon, 22 Nov 1999 22:11:50 -0400
Lamar McLouth had a brainwave about [netconnect] Re: Random disconnects:
> Hi Dwight,
>
> On 22-Nov-99, you wrote:
>
> >> I have a SupraExpress 56e V.90 modem and NetConnect 2.3. I usually
> >> connect at 44,000 baud but I get random disconnects quite often.
> >> The cause almost always seems to be a "Retrain Failure".
> >>
> >> What is a good INIT string to use?
> >
> > I have the same modem and I use the Generic Modem (As NC3
> > doesn't list this). I connect at 115200, with a noticable speedup
> This is the connection speed between the modem and the Amiga. I was
> referring to the speed from the phone line to the modem.
>
> > (Lucky?), sometimes 7-10,000 kps with V3.
> >
> > Init String: AT&F&D2\r
> > Dial Prefix: ATDT
> > Dial Suffix: \r
> > Anwer: ATA\r
> >
> >>
> >> What is the command to correct for this "Retrain Failure"?
> >
> > Never seen this.
> >
> Anyone else have any idea for the "Retrain Failure" problem?
>
>
> Thanks.
>
> Lamar
A quick fix might be
Init String: AT&F+MS=11\r (depending of what chip set u have)
which drops the V90 connection to v34 (33600). Part of the problem
might be the V90 software ur ISP is using.
Jon
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
