Hi John,
On 22-Nov-99, you wrote:
>> I have a SupraExpress 56e V.90 modem and NetConnect 2.3. I usually
>> connect at 44,000 baud but I get random disconnects quite often.
>> The cause almost always seems to be a "Retrain Failure".
>
> Think you missed the earlier mystical discussion.
>
> Reduce connect speed eg: to 110000 and the connection goes faster
> and probobly drops are reduced too.
My modem is plugged into a GVP I/O Extender and I do have it
communicating at 115200 baud (even though I have had it at 230400
before.) I connect to my ISP at 44000 baud.
>
>> What is a good INIT string to use?
>
> There are website giving init strings or have a look at a demo of
> miami which has a list built in.
OK, I'll try to look around. Do you know of any website in
particular?
>
>> What is the command to correct for this "Retrain Failure"?
>
> Say Damn, but at least it's unmetered, unlike the poor UK suckers
I was referring to a Hayes command that either disables retrains or
changes the conditions of the retrain.
Lamar
--
+----------------------------+---------------------------------------+
| Lamar McLouth /// | -----=<{ AMIGAfied in 1990 }>=----- |
| __ /// | A4000 MkII 060-50, 114MB, Picasso IV |
| [EMAIL PROTECTED] \\\/// | Concierto, SyJet, Yamaha CRW4416SXZ |
| ICQ #: 35391338 \X// | DCTV, A3000/25, A1000, C128, C64 |
+----------------------------+---------------------------------------+
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
