Hi Dark
On 11-Dec-99, Dark 1 wrote:
> Am I the only one on this list with an Amiga that old?
> Apparently, newer revisions don't even have the clock port expansion pins,
> and revisions 1D4 and 2B have timing problems which some clock port
> expansions don't like without modifications. These modifications cost �30
> + P&P, which seems a bit steep when a 2nd hand A1200 can cost roughly the
> same.
I have a 1d4 REV Mother Board
> Incidentally, I now have a new Hypercom which I can't use, and seemingly
> no way of contacting Chris Wiles to arrange any alternative. I may need to
> sell it at a loss soon and resign myself to the slow internal serial port.
> :-(
and I can't use my HyperCOM either but using the internal serial port,
8n1.device and serprefs serial prefs program i use 115200 baud (it won't
connect at anything less or more :-) and get connection speeds of 52000 with
Prestel and 49666 with Free4all, as shown in Genesis window. I get very few
non-connections, and these are usually with Free4all, and they are usually
the "lines are busy, call back later" type. I know that with the HyperCOM it
could be faster but with having to replace the engine in my car the
modifications to the mother board will have to wait :-(
Just as an after thought my mate has an older 1200 than I do and he uses
the HyperCOM device but I don't know what revision his mother board is.
--
Don't Worry, Be Happy
Sandy
E-Mail: [EMAIL PROTECTED]
http://www2.prestel.co.uk/birrell/
IRC: Sandyb in #Rabble uk3.arcnet.vapor.com Port:6667
http://www2.prestel.co.uk/birrell/Rabbled
ICQ : 41266150
MILLENIUM Party in #Rabble at 11pm GMT on 31st DECEMBER
Call in and say hello.
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
