> Having thought about this again.
>
> You 1st need to download the non-NC2 update and install that. THEN
> install the update you mention which replaces the bit in the software
> which looks for NC3 keyfiles to NC2 keyfiles.
>
I installed it ok , just forgot to reboot. Works fine now:)
Got a bit of a shock when I copied ny data over to 1.4.4
only a mere 62mb.
> Oh and if you then can't get it to work (I can't) you can help me by
> telling me where I can get CManager.mcc v10 13.1 from on the Vapor
> site:P
>
I don't use Contact Manager , but a quick look in MUI/libs/mui shows
CManager.mcc version 13.5 size 121620.
> -Bridge
>
> > Well done Olli,
> >
> > Unfortuately I can't get it to work. I downloaded 'md2_14.lzx'
> > from the Vapor site (dosen't seem to be a 1.4.4) and then copied over
> > the new NC2 excutable only to get this message.
> >
> > Error:Microdot requires (at least) V14 of vapor_toolkit.libary in
> > LIBS,
> > but you only have V13 installed. Please update.
> >
> > I tried downloading the vapor toolkit on the site but this to is v13
> > and so is the library in Voy3.0.
> >
> > Any ideas
> >
> > Many thanks
> >
> >
> >
> > > Hi,
> > >
> > > Due to the possible Y2k-problems with parsing Date:
> > > lines, I've compiled a special version of MD-2 1.4.4
> > > which works with the NC2 keyfile library. The
> > > archive "md2_144_nc2.lha" is available from all
> > > Vapor download sites.
> > >
> > > I'm providing this update "on my own" instead of
> > > the usual Active Technologies support channels
> > > due to the possible urgent nature of the problem.
> > >
> > > Olli
> > >
> > > ===8<======8<======8<======8<======8<======8<======8<===
> > >
> > > MicroDot II 1.4.4 for NetConnect II users
> > > -----------------------------------------
> > >
> > > This is a special compile of MD-II 1.4.4 which
> > > works with a NetConnect II installation. This
> > > release is done because the MD-II which originally
> > > ships with NC2 might cause Y2k-related problems
> > > when parsing two-digit Date: lines.
> > >
> > > You still need to download the "public" MD-2 1.4.4
> > > archive and install normally. After installation,
> > > replace the main executable with the one from
> > > this archive.
> > > _____________________________________________________________
> > > NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> > > message to <[EMAIL PROTECTED]>
> > >
> >
> > --
> > Amiga A1200T(Power Tower), Blizzard PPC 603e+ 200mhz,
> > 68060 50mhz, 2+48mb RAM, BVision, 4.3gb 3.5" IDE HD,36*IDE CDROM,
> > 33600 Modem, Iiyama VM403, Micronic HD Floppy,Canon BJC-4100.
> >
> > _____________________________________________________________
> > NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> > message to <[EMAIL PROTECTED]>
> >
> >
>
> --
> http://www.mythicz.u-net.com | DT-MUD:sunsite.auc.dk:4242
> Amigan | Vegan | KOSHan - http://kosh.convergence.org
> Yes this email client is NOT Y2K complient - blame it on no update for
> Netconnect2 (and �30 for the update when I just want to fix the bug is
> excessive!)
> _____________________________________________________________
> NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> message to <[EMAIL PROTECTED]>
>
--
Amiga A1200T(Power Tower), Blizzard PPC 603e+ 200mhz,
68060 50mhz, 2+48mb RAM, BVision, 4.3gb 3.5" IDE HD,36*IDE CDROM,
33600 Modem, Iiyama VM403, Micronic HD Floppy,Canon BJC-4100.
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
