Hello Neil,
>> What serial port are you using with the ME?? I use a GVP I/O extender on the
>> 4000 and a Hypercomm1 on the 1200 and can get 52667 at times.
>
> The serial port has nothing to do with the connect speed. This is
> negotiated between your modem and the server, only those and the
> connection between them have an effect.
>
> 52667 is an impressive speed, but you may find you get faster throughput
> if you configure the modem to connect at a slightly slower speed. At
> that speed, it's quite possible that the error rate will be high enough
> to adversely affect transfer rates.
Slight typo - I meant 50667, not 52667 - but this is still more than I used to get. I
did have the modem set to one speed down and only ever got 48000 odd. Put the modem
up and it went higher :)
So I'm a happy bunny. What "errors" are these anyway?? line drops (minimal)? data
corruption? (not that I know of, unless my amiga.org troubles are symptamatic of
this..)?
TTFN
Sam
--
Bifford the Youngest
(Sam Byford)
Visit my site:
http://www.photopoetry.co.uk
ICQ: 52983236
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
