I have a problem running NetSurf on a R-Pi B+ It used to work. Then, one day, stopped running. I made no change to the R-Pi at the time.
However the B+ appears to be extremely unreliable: "Disc error" keeps being reported. Usually falsely - but sometimes ther is a corruption, so I thin something may have been corrupted. But what? I have had the SD card replaced, and th eR-Pi itself. I have also almost entirely eliminated the power supply as a problem. When I run Netsurf, it goes into a continuous hour-glassing loop. alt-break stops it. I have Reporter running: this gives me no clues. It reports *Filer_run .... !Netsurf. Then after the Alt-Break, it lists a whole host of output, stopping at [Appl/0B2039C4] RMEnsure Iconv 0.04 Error 16_10F iconv support requires the Iconv module 0.04 or newer ** WimpError ** from Window Manager Error : &050DEAD0 Message: Press Stop to terminate Unknown. I have replaced Netsurf with a completely new update. No change. I have replaced Iconv and several other modules. No joy! So0 has anyone any idea of what is happening, or what I should do next? It's the "Unknown" that's looping. -- Richard Torrens. http://www.Torrens.org.uk for genealogy, natural history, wild food, walks, cats and more!