Date: Sun, 30 Sep 2001 08:40:19 +500
From: Karen Lewellen <[EMAIL PROTECTED]>
Subject: Re: the right way?

hi,
as i noted in my reply on the other list. the interserv suggestion has
already been made and is a good one.  however, i need to know what speed of
processor has to do with it?  the faster of the two, so to speak, is not the
sending but receiving machine, with all the commands being run from he
slower one technically.  so i am not sure how this matters, and the cpu
speed was not noted in the first information.

btw, if anyone on this list has a copy of the telesensory screen reader
screen power, i would appreciate it.  my normal dos one uses a key which
sits in the parallel port.it does not interfeer with printing, but who knows.
 btw jaws for dos does not support my sysenthsiser.
thanks,
karen

On 2001-09-30 [EMAIL PROTECTED] said:
   >Hi, Karen,
   >If you use a serial transfer for the files, the baud rates should
   >be the same on both machines.  Select the fastest baud rate you can
   >get reliably, with the fewest errors, on the slower of the two
   >machines.
   >As I mentioned in my post to the question on the DOS-Discuss list, a
   >better solution is to use interlnk.invoked as a device in
   >Config.Sys on the machine with the fastest processor; and intersvr.
   >exe, invoked from the command line at the DOS prompt, on the slower
   >machine; and then use any DOS-based copy program, such as DOS's own
   >xcopy.exe with directory structure commands to do the file transfer.
   >A parallel port connection is much faster and easier than a serial
   >port connection using nullmodem serial cables.
   >Make sure you have enough drive letters on the interlnk.exe -running
   >machine to accommodate the new drive letters you'll get by having
   >the disk drives of the intersvr.exe -running machine added to the
   >drive list of the controlling, interlnk.exe -running machine.
   >For a quick list of commands, arguments, and parameters for either
   >interlnk.exe or intersvr.exe , programs supplied free with either
   >MS- or PC-DOS later than 5.0, just type:
   >interlnk /?
   >or:
   >intersvr /?
   >to invoke the DOS Help screens for those programs.
   >Brent Reynolds
   >Random Access Internet Shell account
   >Standard disclaimers apply.
   >Email: [EMAIL PROTECTED]

Net-Tamer V 1.12.0 - Test Drive
 



********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
                     Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************

Reply via email to