Date: Thu, 11 Oct 2001 18:17:05 +500
From: Karen Lewellen <[EMAIL PROTECTED]>
Subject: Re: copying data problem?
hi folks,
this is beyond a "do not try this at home," thing from a speach
perspeective, at least if your screen reader requires a software key.
i have no idea, as of yet in tnerms of the quality of the transfer as it
froze in the middle. I can say that learning that it could not be done with
sighted help cost me a lot of time, and did not get the hardware items
transfered that i was also to do. In short, i'm no better off than I was
and may be worse lol.
thanks for the guidence in any case,
karen
On 2001-10-12 [EMAIL PROTECTED] said:
>CC: <[EMAIL PROTECTED]>
>MIME-Version: 1.0
>>i have the cable, and have made the changes to my config.sys file.
>>as told.
>>now, when i boot the receiving computer i am typing
>>intersrv
>>and pressing enter.
>First, at that point, you should have a dos window showing the
>server (or the "receiving conputer") waiting for a signal from the
>other conputer. And you have to boot this one now (or after boot
>reenter the interlnk command)
>>my speach is only runing on the source computer, so i amnot sure
>>what message if any i am getting on the receiving computer.
>>however if i run msd to check for the drive on the receiving
>>computer i get the following.
>>my a, b, and c, drives on the source computer
>>a d, e, f, drive which are listed as flopy drives with one cilnder,
>>and a g drive which is the cd rom drive on my source computer.
>>if i try to read either the d, e, or f, drive i get a drive not
>>ready error. however i can read the g.
>Something is strange : interlnk can not permit access to CDROM of
>the server
>>i have two questions,
>>1, is there a better way to learn if one of the drives is the drive
>>from the receiving computer?
>You should see a star * blinking on the receiving computer during
>access
>>and
>>2, are there any commands at all that should be done on the
>>receiving computer save typing
>>intersrv?
>include it in autoexec.bat
>>wait there is onemore.
>>what should be the order of boot to insure i am getting the right
>>data in the first place?
>the server first the other afterwards
>>thanks,
>>karen
>De rien
>Gontran
>Net-Tamer V 1.11.2X - Registered
>------100120200109001057NTI--
make your own kind of music!
Karen Lewellen, [EMAIL PROTECTED]
Net-Tamer V 1.12.0 - Test Drive
********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************
