On Wednesday 15 December 2004 19:52, Anne Wilson wrote: > On Wednesday 15 Dec 2004 18:40, Pablo Ortuzar wrote: > > On Wednesday 15 December 2004 19:15, Pablo Ortuzar wrote: > > > > Hi, it's still me. I've just tested K3b with 5 Philips CD.RWs. Same > > results. > > There are others who know a lot more about this than I do, but a quick > google suggests that you are far from alone in this problem, and k3b seems > to be the app most complained about. Have you tried XCDRoast? It isn't as > pretty as k3b, and you do have to run the setup as root before users can > use it, but I've generally found it reliable. There are some things done > easier in k3b, but that would buy you time while you troubleshoot this. > > Anne
Hi, Anne XCDRoast? Yes, I tried that one with SuSE: not better with Madrake (see below). Pablo Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "ATA:0,1,0" gracetime=2 fs=4096k -v driveropts=burnfree speed=12 -dao -eject -pad -waiti tsize=105051s - scsidev: 'ATA:0,1,0' devname: 'ATA' scsibus: 0 target: 1 lun: 0 ######################################################################################### # # Warning: Using ATAPI via /dev/hd* interface. Use dev=ATA:X,Y,Z or dev=/dev/hdX # ######################################################################################### Linux sg driver version: 3.5.27 cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <[EMAIL PROTECTED]>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Waiting for data on stdin... Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'LITE-ON ' Identifikation : 'LTR-12101B ' Revision : 'LS38' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R Drive buf size : 1658880 = 1620 KB Drive DMA Speed: 13274 kB/s 75x CD 9x DVD FIFO size : 4194304 = 4096 KB Track 01: data 205 MB padsize: 30 KB Total size: 235 MB (23:20.88) = 105066 sectors Lout start: 236 MB (23:22/66) = 105066 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 3 A1 values: 24 1A BC A2 values: 26 B2 26 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 254783 Speed set to 1764 KB/s Starting to write CD/DVD at speed 10.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... cdrecord: Success. write_g1: scsi sendcmd: no error Writing pregap for track 1 at -150 CDB: 2A 00 FF FF FF 6A 00 00 1F 00 write track pad data: error after 0 bytes status: 0x2 (CHECK CONDITION) BFree: 1860 K BSize: 1860 K Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 Starting new track at sector: 0 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 22.536s timeout 200s cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 18.635s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 47.612s Average write speed 29.4x. Fixating... Fixating time: 0.002s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
