On Wed, 5 Sep 2001, Rob Lofland wrote:
> Please help.
>
> My Radeon 32 Mb DDR runs fine with "NoAccel" set true but when I comment it
> out, my screen goes black and PC locks up. I don't even get a dump into
> /var/log/XFree86.0.log, the log is simply the one that was created when I ran
> previously with noaccel. Before running the X server, I "insmod radeon". Is
> this right ? Here's my XF86config-4 as well as the XFree86.0.log that was
> created when I had accel turned off.
Try the following patch, and rebuild X:
--- xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c.orig Mon Sep 3
02:17:23 2001
+++ xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c Mon Sep 3 02:44:13
+2001
@@ -255,8 +255,7 @@
RADEON_SOFT_RESET_RE |
RADEON_SOFT_RESET_PP |
RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB |
- RADEON_SOFT_RESET_HDP);
+ RADEON_SOFT_RESET_RB);
INREG(RADEON_RBBM_SOFT_RESET);
OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset & (CARD32)
~(RADEON_SOFT_RESET_CP |
@@ -265,8 +264,7 @@
RADEON_SOFT_RESET_RE |
RADEON_SOFT_RESET_PP |
RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB |
- RADEON_SOFT_RESET_HDP));
+ RADEON_SOFT_RESET_RB));
INREG(RADEON_RBBM_SOFT_RESET);
OUTPLL(RADEON_MCLK_CNTL, mclk_cntl);
There's a similar patch to apply to
xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/radeon_cp.c.
Then copy
xc/exports/lib/modules/dri/radeon_dri.so and
xc/exports/lib/modules/drivers/radeon_drv.so
to
/usr/X11R6/lib/modules/radeon_dri.so
/usr/X11R6/lib/modules/radeon_drv.so
and restart your X server.
--
Chris BeHanna
Software Engineer (Remove "bogus" before responding.)
[EMAIL PROTECTED]
I was raised by a pack of wild corn dogs.
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
