Tried the patch described below but now I can't even launch X. I get lots of
unresolved symbols when I startx. Tried to make install in xc directory but
that aborts with "can't find -lncurses". I enabled "define -lncurses" in
xc/config/cf/host.def but make install still aborts the same way.
Suggestions greatly appreciated,
Rob
----- Original Message -----
From: "Sprague, IT3" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 05, 2001 11:41 PM
Subject: RE: [Newbie]Radeon locks up when running accelerator
> Yeah, make World... You're only upgrading the radeon driver, so you won't
> need to re-install the server unless you get some unresolved symbols with
> the new driver, in which case just do a 'make install' in xc...
>
> > -----Original Message-----
> > From: Rob Lofland [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, September 06, 2001 8:32 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [Newbie]Radeon locks up when running accelerator
> >
> >
> > By "rebuild X", do you mean "make World" ? Does doing this
> > also install the
> > new X server files or do I have to do that separately ?
> >
> > Thanks,
> > Rob
> >
> > On Wednesday 05 September 2001 23:22, you wrote:
> > > On Wed, 5 Sep 2001, Rob Lofland wrote:
> > > > Please help.
> > > >
> > > > My Radeon 32 Mb DDR runs fine with "NoAccel" set true but
> > when I comment
> > > > it out, my screen goes black and PC locks up. I don't
> > even get a dump
> > > > into /var/log/XFree86.0.log, the log is simply the one
> > that was created
> > > > when I ran previously with noaccel. Before running the X server, I
> > > > "insmod radeon". Is this right ? Here's my XF86config-4
> > as well as the
> > > > XFree86.0.log that was created when I had accel turned off.
> > >
> > > Try the following patch, and rebuild X:
> > >
> > > ---
> > xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel
> > .c.orig Mon Sep
> > > 3 02:17:23 2001 +++
> > > xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
> > Mon Sep 3
> > > 02:44:13 2001 @@ -255,8 +255,7 @@
> > > RADEON_SOFT_RESET_RE |
> > > RADEON_SOFT_RESET_PP |
> > > RADEON_SOFT_RESET_E2 |
> > > - RADEON_SOFT_RESET_RB |
> > > - RADEON_SOFT_RESET_HDP);
> > > + RADEON_SOFT_RESET_RB);
> > > INREG(RADEON_RBBM_SOFT_RESET);
> > > OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset & (CARD32)
> > > ~(RADEON_SOFT_RESET_CP |
> > > @@ -265,8 +264,7 @@
> > > RADEON_SOFT_RESET_RE |
> > > RADEON_SOFT_RESET_PP |
> > > RADEON_SOFT_RESET_E2 |
> > > - RADEON_SOFT_RESET_RB |
> > > - RADEON_SOFT_RESET_HDP));
> > > + RADEON_SOFT_RESET_RB));
> > > INREG(RADEON_RBBM_SOFT_RESET);
> > >
> > > OUTPLL(RADEON_MCLK_CNTL, mclk_cntl);
> > >
> > >
> > > There's a similar patch to apply to
> > >
> > xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/rad
> > eon_cp.c.
> > >
> > > Then copy
> > > xc/exports/lib/modules/dri/radeon_dri.so and
> > > xc/exports/lib/modules/drivers/radeon_drv.so
> > > to
> > > /usr/X11R6/lib/modules/radeon_dri.so
> > > /usr/X11R6/lib/modules/radeon_drv.so
> > >
> > > and restart your X server.
> > _______________________________________________
> > Newbie mailing list
> > [EMAIL PROTECTED]
> > *** To unsubscribe , or change message options, see:
> > http://XFree86.Org/mailman/listinfo/newbie
> >
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
