Yeah, make World... You're only upgrading the radeon driver, so you won't
need to re-install the server unless you get some unresolved symbols with
the new driver, in which case just do a 'make install' in xc...
> -----Original Message-----
> From: Rob Lofland [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 06, 2001 8:32 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [Newbie]Radeon locks up when running accelerator
>
>
> By "rebuild X", do you mean "make World" ? Does doing this
> also install the
> new X server files or do I have to do that separately ?
>
> Thanks,
> Rob
>
> On Wednesday 05 September 2001 23:22, you wrote:
> > On Wed, 5 Sep 2001, Rob Lofland wrote:
> > > Please help.
> > >
> > > My Radeon 32 Mb DDR runs fine with "NoAccel" set true but
> when I comment
> > > it out, my screen goes black and PC locks up. I don't
> even get a dump
> > > into /var/log/XFree86.0.log, the log is simply the one
> that was created
> > > when I ran previously with noaccel. Before running the X server, I
> > > "insmod radeon". Is this right ? Here's my XF86config-4
> as well as the
> > > XFree86.0.log that was created when I had accel turned off.
> >
> > Try the following patch, and rebuild X:
> >
> > ---
> xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel
> .c.orig Mon Sep
> > 3 02:17:23 2001 +++
> > xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
> Mon Sep 3
> > 02:44:13 2001 @@ -255,8 +255,7 @@
> > RADEON_SOFT_RESET_RE |
> > RADEON_SOFT_RESET_PP |
> > RADEON_SOFT_RESET_E2 |
> > - RADEON_SOFT_RESET_RB |
> > - RADEON_SOFT_RESET_HDP);
> > + RADEON_SOFT_RESET_RB);
> > INREG(RADEON_RBBM_SOFT_RESET);
> > OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset & (CARD32)
> > ~(RADEON_SOFT_RESET_CP |
> > @@ -265,8 +264,7 @@
> > RADEON_SOFT_RESET_RE |
> > RADEON_SOFT_RESET_PP |
> > RADEON_SOFT_RESET_E2 |
> > - RADEON_SOFT_RESET_RB |
> > - RADEON_SOFT_RESET_HDP));
> > + RADEON_SOFT_RESET_RB));
> > INREG(RADEON_RBBM_SOFT_RESET);
> >
> > OUTPLL(RADEON_MCLK_CNTL, mclk_cntl);
> >
> >
> > There's a similar patch to apply to
> >
> xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/rad
> eon_cp.c.
> >
> > Then copy
> > xc/exports/lib/modules/dri/radeon_dri.so and
> > xc/exports/lib/modules/drivers/radeon_drv.so
> > to
> > /usr/X11R6/lib/modules/radeon_dri.so
> > /usr/X11R6/lib/modules/radeon_drv.so
> >
> > and restart your X server.
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
