Did you try rebuilding the entire X tree? (make clean;make World;make
install;make install.man)
> -----Original Message-----
> From: Rob Lofland [mailto:[EMAIL PROTECTED]]
> Sent: Friday, September 07, 2001 8:00 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [Newbie]Radeon locks up when running accelerator
>
>
> Tried the patch described below but now I can't even launch
> X. I get lots of
> unresolved symbols when I startx. Tried to make install in xc
> directory but
> that aborts with "can't find -lncurses". I enabled "define
> -lncurses" in
> xc/config/cf/host.def but make install still aborts the same way.
>
> Suggestions greatly appreciated,
> Rob
>
> ----- Original Message -----
> From: "Sprague, IT3" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, September 05, 2001 11:41 PM
> Subject: RE: [Newbie]Radeon locks up when running accelerator
>
>
> > Yeah, make World... You're only upgrading the radeon
> driver, so you won't
> > need to re-install the server unless you get some
> unresolved symbols with
> > the new driver, in which case just do a 'make install' in xc...
> >
> > > -----Original Message-----
> > > From: Rob Lofland [mailto:[EMAIL PROTECTED]]
> > > Sent: Thursday, September 06, 2001 8:32 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: [Newbie]Radeon locks up when running accelerator
> > >
> > >
> > > By "rebuild X", do you mean "make World" ? Does doing this
> > > also install the
> > > new X server files or do I have to do that separately ?
> > >
> > > Thanks,
> > > Rob
> > >
> > > On Wednesday 05 September 2001 23:22, you wrote:
> > > > On Wed, 5 Sep 2001, Rob Lofland wrote:
> > > > > Please help.
> > > > >
> > > > > My Radeon 32 Mb DDR runs fine with "NoAccel" set true but
> > > when I comment
> > > > > it out, my screen goes black and PC locks up. I don't
> > > even get a dump
> > > > > into /var/log/XFree86.0.log, the log is simply the one
> > > that was created
> > > > > when I ran previously with noaccel. Before running
> the X server, I
> > > > > "insmod radeon". Is this right ? Here's my XF86config-4
> > > as well as the
> > > > > XFree86.0.log that was created when I had accel turned off.
> > > >
> > > > Try the following patch, and rebuild X:
> > > >
> > > > ---
> > > xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel
> > > .c.orig Mon Sep
> > > > 3 02:17:23 2001 +++
> > > > xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
> > > Mon Sep 3
> > > > 02:44:13 2001 @@ -255,8 +255,7 @@
> > > > RADEON_SOFT_RESET_RE |
> > > > RADEON_SOFT_RESET_PP |
> > > > RADEON_SOFT_RESET_E2 |
> > > > - RADEON_SOFT_RESET_RB |
> > > > - RADEON_SOFT_RESET_HDP);
> > > > + RADEON_SOFT_RESET_RB);
> > > > INREG(RADEON_RBBM_SOFT_RESET);
> > > > OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset & (CARD32)
> > > > ~(RADEON_SOFT_RESET_CP |
> > > > @@ -265,8 +264,7 @@
> > > > RADEON_SOFT_RESET_RE |
> > > > RADEON_SOFT_RESET_PP |
> > > > RADEON_SOFT_RESET_E2 |
> > > > - RADEON_SOFT_RESET_RB |
> > > > - RADEON_SOFT_RESET_HDP));
> > > > + RADEON_SOFT_RESET_RB));
> > > > INREG(RADEON_RBBM_SOFT_RESET);
> > > >
> > > > OUTPLL(RADEON_MCLK_CNTL, mclk_cntl);
> > > >
> > > >
> > > > There's a similar patch to apply to
> > > >
> > > xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/rad
> > > eon_cp.c.
> > > >
> > > > Then copy
> > > > xc/exports/lib/modules/dri/radeon_dri.so and
> > > > xc/exports/lib/modules/drivers/radeon_drv.so
> > > > to
> > > > /usr/X11R6/lib/modules/radeon_dri.so
> > > > /usr/X11R6/lib/modules/radeon_drv.so
> > > >
> > > > and restart your X server.
> > > _______________________________________________
> > > Newbie mailing list
> > > [EMAIL PROTECTED]
> > > *** To unsubscribe , or change message options, see:
> > > http://XFree86.Org/mailman/listinfo/newbie
> > >
> > _______________________________________________
> > Newbie mailing list
> > [EMAIL PROTECTED]
> > *** To unsubscribe , or change message options, see:
> > http://XFree86.Org/mailman/listinfo/newbie
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
