Carl Wilhelm Soderstrom wrote:
>>This looks as if it would explain but one thing I did was when X fucked
>>up again and my screen started turning white I pressed ctrl-alt-Fn and
>>it didn't do crap.
>>
> what about ctrl+alt+backspace? probably won't work either, but is
>worth a shot.
>
>> Not only that but since I'm using FreeBSD instead of
>>Linux I can't use Xconfigurator. I'm starting to get a little irritated
>>here so anyone that could help me out I would appreciate it greatly.
>>
> try posting your XF86Config file, the output of whatever the FreeBSD
>equivalent of '/sbin/lspci' is, the output of 'startx 2>x.log', and maybe a
>dmesg. We'll at least take a look at it.
>
>Carl Soderstrom
>
Yes, I did try ctrl-alt-backspace and it didn't work, my computer was
being a pain in the ass so I attached the XF86Config.new file which is
the same as the XF86Config-4 file and my x.log as you requested. When I
recorded the x.log though that was like the only time that it didn't
turn white on me though, so tell me if that's good enough.
Dave
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "xie"
Load "pex5"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CCEPIOMode" # [<bool>]
#Option "CCENoSecurity" # [<bool>]
#Option "CCEusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "UseCCEfor2D" # [<bool>]
#Option "Display" # <str>
#Option "PanelWidth" # <i>
#Option "PanelHeight" # <i>
#Option "ProgramFPRegs" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "ShowCache" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Rage 128 Mobility MF"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.4-RELEASE i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Dec 3 04:03:55 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Rage 128 Mobility MF rev 0, Mem @ 0xe8000000/26, 0xfcffc000/14,
I/O @ 0xcc00/8
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(--) Chipset ATI Rage 128 Mobility MF (AGP) found
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) R128(0): PCI bus 1 card 0 func 0
(==) R128(0): Depth 8, (==) framebuffer bpp 8
(II) R128(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
(==) R128(0): Default visual is PseudoColor
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) R128(0): initializing int10
(==) R128(0): Write-combining range (0xa0000,0x20000) was already clear
(==) R128(0): Write-combining range (0xf0000,0x10000)
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility MF (AGP)" (ChipID = 0x4d46)
(--) R128(0): Linear framebuffer at 0xe8000000
(--) R128(0): MMIO registers at 0xfcffc000
(==) R128(0): Write-combining range (0xfcffc000,0x80000) was already clear
(--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1600x1200
(II) R128(0): Panel ID: Sharp LQ150U1LH22
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE DDC supported
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) R128(0): Monitor0: Using default hsync range of 28-33kHz
(WW) R128(0): Monitor0: using default vrefresh range of 43-72Hz
(II) R128(0): Clock range: 12.00 to 270.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "1856x1392" (no mode of this name)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (no mode of this name)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(--) R128(0): Virtual size is 800x600 (pitch 832)
(**) R128(0): Default mode "800x600": 160.0 MHz, 29.4 kHz, 45.2 Hz
(==) R128(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(==) R128(0): Write-combining range (0xfcffc000,0x80000) was already clear
(==) R128(0): Write-combining range (0xe8000000,0x2000000)
(==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
(EE) R128(0): [dri] R128DRIScreenInit failed (depth 8 not supported). [dri] Disabling
DRI.
(II) R128(0): Memory manager initialized to (0,0) (832,8191)
(II) R128(0): Reserved area from (0,600) to (832,602)
(II) R128(0): Largest offscreen area available: 832 x 7589
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
28 256x256 slots
13 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 602)
(II) R128(0): Largest offscreen area available: 832 x 7586
(II) R128(0): Direct rendering disabled
(**) Mouse0: Protocol: "auto"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!
waiting for X server to shut down X connection to :0.0 broken (explicit kill or server
shutdown).
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
(==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
