Looks like X can't find the mem range where the card BIOS should be.
Was your XF86Config generated with X -configure or some other program?
Is it an AGP or PCI card?
>
> X -version
>
> (EE) R128(0): Cannot read V_BIOS (5)
> (--) R128(0): Chipset: "ATI Rage 128 RE (PCI)" (ChipID = 0x5245)
> (--) R128(0): Linear framebuffer at 0x88000000
> (--) R128(0): MMIO registers at 0x80900000
> (--) R128(0): BIOS at 0x80920000
> (II) R128(0): Video RAM override, using 32768 kB instead of 16384 kB
> (**) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
> (WW) R128(0): Video BIOS not detected in PCI space!
> (WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
> (WW) R128(0): Video BIOS not found!
> (WW) R128(0): Can't determine panel dimensions, and none specified.
>
> Disabling programming of FP registers.
> (II) R128(0): PLL parameters: rf=2950 rd=35 min=12500 max=25000; xclk=7501
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) R128(0): My Monitor: Using hsync range of 31.50-37.90 kHz
> (II) R128(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
> (II) R128(0): Clock range: 12.50 to 250.00 MHz
> (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
> (II) R128(0): Not using default mode "320x175" (vrefresh out of range)
> (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
> (II) R128(0): Not using default mode "320x200" (vrefresh out of range)
> (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
> (II) R128(0): Not using default mode "360x200" (vrefresh out of range)
> (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
> (II) R128(0): Not using default mode "320x240" (vre
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
