I am using XFree86 4.2 under Suse Linux 8.0 with a linux kernel of 2.4.18. I have an Elo Touchscreen. I have followed the EloTouch installation instructions in setting up the /etc/X11/XF86Config file manually, and I have also ran the SaX2 program to setup that config file automatically, but I still cannot get the EloTouch screen to work. The XF86Config file looks like something like this, although I have tried many variations in my attempts:
Added to "ServerLayout" section
'Inputdevice "touchscreen1"
"SendCoreEvents"'
Added an "InputDevice" section
'Section "InputDevice"
Identifier "touchscreen1"
Driver "elographics"
Option "Device" "/dev/ttyS2"
Option "AlwaysCore"
Option "screenno" "0"
Option "MinX" "600"
Option "MaxX" "3600"
Option "MinY" "600"
Option "MaxY" "3600"
Option "UntouchDelay" "3"
Option "ReportDelay" "1"
EndSection'
Then I restart the X Server by logging out, and I have also tried rebooting,
but It still doesn't work. I also noticed I get an error message in the
/var/log/Xfree86.0.log file. I dont know if its related or not, but the
error is:
Not at the specified rate or model 2310, will continue
Unable to ask Elographics touchscreen identification
Is there anyone who might be able to help me figure out what I'm missing ?
Thanks...
===================================
Scott Wentzel
Rite Solutions
1272 West Main Rd, Middletown, RI, 02842
[EMAIL PROTECTED]
www.rite-solutions.com
(401) 847-3399 x26 (office)
(401) 847-8833 (fax)
===================================
<<attachment: winmail.dat>>
